Silox Sandbinder 927 for the production of high-strength joint mortar (1.5 kg mix pack)

Silox Sandbinder 927 is a binder for producing high-strength joint mortars from sand. Silox Sandbinder 927 is easy to apply and features fast and reliable through-hardening. Modern resin/hardener systems are used. Our products are solvent-free. Silox Sandbinder 927 is a 2-component epoxy resin binder, solvent-free, suitable for dry, damp, and even wet quartz sand (and other granular aggregates).

Areas of application

For the production of air- and water-permeable paving joints, as well as for light traffic paths, tree grates, and similar applications in landscaping and gardening.

Properties

The hardener of Silox Sandbinder 927 is a special polyaminoamide. This product is characterized by a long pot life, elasticity, and excellent adhesion, even on wet surfaces. Resin component: liquid epoxy resin, modified Hardener: polyamine adduct Mixing ratio: 1:2 by volume (resin to hardener) Density (mixed): approx. 1.05 Pot life: 150-200 minutes at 20° Minimum temperature: 10°C Walkable: 24 - 36 hours after installation (at 20°C) Water-permeable mortars can only be produced from sufficiently coarse aggregates without cohesive components or fines. Mixtures of grain fractions between 0.4 - 1 mm with the most uniform grain distribution possible are ideally suited. The use of coarse single-grain mixtures is not recommended. The two SILOX components are either pre-mixed separately - by hand in the MixPack, or when taken from large containers, appropriately mixed with a mixing machine (drill with stirring paddle or spiral mixer) in a bucket and then with the aggregates in a compulsory mixer, or added directly to the compulsory mixer before the aggregates. The usual addition amount for producing water- and air-permeable joints and surfaces is approx. 4-5 wt.% SILOX binder, based on the weight of the mineral components (aggregates) of the mixture. The necessary amount of binder depends on the grain size and grain distribution (grading curve) of the aggregates. With an increasing proportion of fine grain fractions in the mixture, the binder requirement increases significantly.

System accessories for Silox Sandbinder 927 for producing high-strength joint mortars

BlocSil 910 – stabilization of joints and surface treatment Stein Rein 915 – highly effective cleaning concentrate

MixPack a 1.5 kg

We deliver exclusively to selected EU countries. The stated prices apply only to the European mainland; no delivery to German or European islands. We deliver all goods curbside.