{"product_id":"silox-dichtschlaemme-863-in-farbe-blaugruen-universelle-abdichtungs-und-beschichtungsmasse-40-kg-grau","title":"Silox Sealing Slurry 863 – universal sealing and coating compound","description":"\u003cp\u003e\u003cstrong\u003eSpecial coloring for water basins\u003c\/strong\u003e - \u003cstrong\u003eSilox 863\u003c\/strong\u003e is a universal sealing and coating compound for all cement-bound building materials. \u003cstrong\u003eSilox 863\u003c\/strong\u003e is absolutely watertight yet vapor-permeable, can be applied to damp substrates, and withstands high water pressure. \u003cstrong\u003eSilox 863\u003c\/strong\u003e is sag-resistant and very tacky, making it easy to work with even on uneven walls with deep surface textures or overhead. \u003cstrong\u003eSilox 863\u003c\/strong\u003e adheres excellently to damp, mineral substrates and metals. If the substrate is clean and load-bearing, no special primers or base coats are necessary. Voids and pore-free coatings are absolutely liquid-tight yet vapor-permeable. Its excellent mechanical properties (hardness, abrasion resistance) also make it suitable for sealing floor surfaces - e.g., in basements and underground parking garages. \u003cstrong\u003eSilox 863\u003c\/strong\u003e can also be used for reprofiling damaged concrete surfaces, wet-on-wet, as a bonding bridge between old and new concrete, as an adhesive for natural and artificial stone, as an anchor mortar, and for similar applications.\u003c\/p\u003e\n\u003ch4\u003eSubstrate requirements\u003c\/h4\u003e\n\u003cp\u003eThe substrate must be clean and free of separating substances or coatings. Mineral substrates must be sufficiently firm and load-bearing; the tensile strength should not fall below 1.5 N\/mm² across the entire surface. Laitance layers on concrete and screed must be removed, and voids and pores must be opened. Iron and steel must be descaled to a bright metallic finish (SA 2½); mill scale and rust must be removed. \u003cstrong\u003eSilox 863\u003c\/strong\u003e is not suitable for plastics or substrates bonded with bitumen, asphalt, or tar.\u003c\/p\u003e\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\u003cp\u003eEmpty component A completely into the container of component B and stir with a mixing machine until the color of the mixture is uniform and streak-free. Then, transfer the mixture as usual and stir thoroughly once more. Do not stir in air! The mixture stiffens significantly during the mixing process and becomes tacky and plastic. This effect is typical for the product and supports the exceptionally good sag resistance of \u003cstrong\u003eSilox 863\u003c\/strong\u003e on vertical surfaces and smooth substrates. By adding a little water - \u003cstrong\u003ea maximum of 5% - the mixture becomes more fluid but remains sufficiently sag-resistant\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eSilox 863 is applied manually with standard tools (spatula, float, trowel, notched trowel) and can also be sprayed like thin-layer plasters or sealing slurries using light spraying machines (screw pumps). Depending on the spray pressure and the supporting air volume, this produces more or less finely textured, uniform surfaces.\u003c\/p\u003e\n\u003ch4\u003eCleaning\u003c\/h4\u003e\n\u003cp\u003eMachines and tools are cleaned with water - ideally with a little dish soap added. Fresh contamination from the material should also be removed by washing with water.\u003c\/p\u003e\n\u003ch4\u003ePot life\u003c\/h4\u003e\n\u003cp\u003eThe pot life of a mixture that has not been additionally diluted with water is approx. 30 - 40 minutes at 20°C. In the case of strong air movement or direct sunlight, a type of skin may form on the surface of freshly applied layers sooner. Such areas should no longer be reworked by smoothing.\u003c\/p\u003e\n\u003ch4\u003eSubsequent coatings\u003c\/h4\u003e\n\u003cp\u003eCoatings made of Silox 863 can be recoated with themselves or with vapor-permeable EP sealers (SILOX-857) after a waiting period of 24 hours. For vapor-tight topcoats, a waiting period of 96 hours (at 20°C) is recommended.\u003c\/p\u003e\n\u003ch4\u003eBoundary conditions\u003c\/h4\u003e\n\u003cp\u003eThe minimum temperature of the substrates should not fall below +9°C. The product must not be applied to glossy wet surfaces. To prevent \"burning\" on highly absorbent surfaces, dampen such areas before application or, better yet, prime them with Silox-856. Color: dark gray. Tested up to 7 bar negative water pressure!\u003c\/p\u003e\n\u003ch4\u003eContainers\/Variants:\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003e40.0 kg blue-green - contains total A and B components\u003c\/li\u003e\n\n\u003cli\u003e40.0 kg white - contains total A and B components\u003c\/li\u003e\n\n\u003cli\u003e40.0 kg gray - contains total A and B components\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"ARCAN","offers":[{"title":"40 kg blue-green","offer_id":62833258398026,"sku":"1209","price":631.13,"currency_code":"EUR","in_stock":true},{"title":"40 kg gray","offer_id":62833258430794,"sku":"1210","price":473.0,"currency_code":"EUR","in_stock":true},{"title":"40 kg white","offer_id":62833258463562,"sku":"1211","price":517.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Cembond-863-Myria-Resort.jpg?v=1787841544","url":"https:\/\/shop.arcan.biz\/en\/products\/silox-dichtschlaemme-863-in-farbe-blaugruen-universelle-abdichtungs-und-beschichtungsmasse-40-kg-grau","provider":"ARCAN GmbH Abdichtungen – Handwerkerstore","version":"1.0","type":"link"}