{"title":"Waterproof paint","description":"\u003cp\u003eWaterproof paints reliably protect walls, ceilings, and other surfaces from moisture, splashing water, and weathering. They form a sealed, water-repellent coating and help to protect the building structure long-term against penetrating moisture and the resulting damage.\u003c\/p\u003e","products":[{"product_id":"hydrobloc-wps-750-wasserdichter-dekorativer-sperranstrich","title":"HydroBloc WPS 750 - waterproof, decorative barrier coating 15 kg","description":"\u003cp\u003eHydroBloc-WPS 750 is a waterproof, decorative barrier coating. The product can be used to coat damp or wet mineral substrates with minimal effort. Elaborate surface preparation is not required. Coatings with WPS-750 have a matte finish, are waterproof, and prevent unsightly efflorescence and water stains. Water vapor diffusion and thus the drying process are not hindered. HydroBloc-WPS coatings react with existing moisture, thereby anchoring themselves to the substrate. Typical applications for HydroBloc-WPS are decorative coatings on damp and wet concrete, masonry, or plaster, preferably after other waterproofing measures. HydroBloc-WPS coatings can replace elaborate dehumidifying plasters or be used as an additional decorative protective coat on such plasters.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eWPS-750 is supplied ready for use and can be applied using any standard painting techniques and methods. The substrates intended for coating must be clean and free of loose materials and separating agents. On wet surfaces, WPS-750 is applied with a block brush and distributed evenly using a cross-coating technique. Brushing works the paint more easily into the pores of the substrate and wets and displaces existing surface water better than is possible with rollers. Depending on the condition, moisture level, and roughness of the substrate, as well as aesthetic requirements, 2 coats are necessary to achieve a homogeneously closed, even surface. The second coat can be applied with a roller. When using sufficiently powerful equipment, WPS-750 can also be applied using airless sprayers. Subsequent coats can be applied either immediately after the previous coat has dried or after any length of time; there are no issues with inter-coat adhesion. HydroBloc-WPS 750 is pigmented pure white. If required, the product can be easily tinted in all pastel shades using standard universal tinting concentrates (e.g., \"MIXOL\" brand). The pigments used must be alkali-resistant; addition amounts should not exceed 5% of the base paint; preliminary tests are recommended. Tinting pastes for emulsion paints or dry pigments are not suitable for tinting. HydroBloc-WPS 750 contains mild-smelling, aromatic-free solvents. Therefore, ensure adequate ventilation during application. For cleaning application tools, we recommend our universally applicable safety solvent HydroSolv 520. Diluting or cleaning with water is not possible. Nevertheless, ensure that work areas are sufficiently ventilated.\u003c\/p\u003e\n\u003ch4\u003eProperties\u003c\/h4\u003e\n\u003cp\u003eMaterial base: Coating material made of special dissolved binders, fillers, and pigments State: Thixotropic, flowable paint Color: White Odor: Mild, solvent-like Density: Approx. 1.40 - 1.45 g\/ml \u003c\/p\u003e\n\u003ch4\u003eApplication Technical Data\u003c\/h4\u003e\n\u003cp\u003eConsumption per coat: Approx. 250 g\/m² for smooth substrates Processing temperature: \u0026gt; 5°C recommended\u003c\/p\u003e\n\u003ch2\u003eSystem Accessories for HydroBloc WPS 750 - waterproof, decorative barrier coating\u003c\/h2\u003e\n\u003cp\u003eHydroBloc Si 709 – Siloxane concentrate for horizontal barriers Cembond 945 M – Surface waterproofing for mineral surfaces\u003c\/p\u003e\n\u003ch4\u003e15 kg containers\u003c\/h4\u003e","brand":"ARCAN","offers":[{"title":"1 kg","offer_id":62357904425290,"sku":"1043","price":27.68,"currency_code":"EUR","in_stock":true},{"title":"15 kg","offer_id":62357904458058,"sku":"1044","price":203.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Sanierfarbe-HydroBloc-WPS-750-Oberfl_C3_A4chenhydrophobierung-e1443537946241.jpg?v=1782831202"},{"product_id":"cembond-mineralfarbe-1041-schmutzabweisend-wasserabweisend-anti-schimmelfarbe-fuer-innen-und-aussen-10-kg-3-beige","title":"Cembond Mineral Paint 1041 - dirt-repellent, water-repellent, anti-mold paint, for indoor and outdoor use (10 kg), color beige","description":"\u003cp style=\"text-align: left;\"\u003eCembond MF 1041 is the ultimate paint for interior and exterior use. This water- and dirt-repellent paint remains brilliantly white for years while ensuring a healthy indoor climate. Cembond MF 1041 can also be applied to damp walls and actively acts against mold growth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ebreathable - vapor-permeable\u003c\/li\u003e\n\n\u003cli\u003eno film formation\u003c\/li\u003e\n\n\u003cli\u003ewater-repellent\u003c\/li\u003e\n\n\u003cli\u003edirt-repellent\u003c\/li\u003e\n\n\u003cli\u003eodorless\u003c\/li\u003e\n\n\u003cli\u003eno solvents - no plasticizers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe dirt-repellent paint is decorative and at the same time a protection for facades and interior surfaces. Cembond is suitable for all mineral building materials. Cembond mineral paint is perfectly suited for high humidity, damp substrates, wet rooms, and areas highly prone to mold. Cembond sets through the hydraulic reaction of the cementitious binder, but without forming a film. Therefore, Cembond mineral paint does not hinder water vapor diffusion and does not peel off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eUV resistant\u003c\/li\u003e\n\n\u003cli\u003eWeather resistant\u003c\/li\u003e\n\n\u003cli\u003eFreeze-thaw resistant\u003c\/li\u003e\n\n\u003cli\u003esuitable for underwater coatings\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e  \u003cstrong\u003eSuitable substrates:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMortar group II and III plasters (DIN 18 550)\u003c\/li\u003e\n\n\u003cli\u003eConcrete\u003c\/li\u003e\n\n\u003cli\u003eAerated concrete\u003c\/li\u003e\n\n\u003cli\u003eBricks\u003c\/li\u003e\n\n\u003cli\u003eSand-lime bricks\u003c\/li\u003e\n\n\u003cli\u003eNatural stones\u003c\/li\u003e\n\n\u003cli\u003eMineral sealing slurries\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e  \u003cstrong\u003eUnsuitable substrates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ePure gypsum plaster\u003c\/li\u003e\n\n\u003cli\u003eSurfaces with old oil-based or emulsion paint coatings\u003c\/li\u003e\n\n\u003cli\u003eglued wall coverings\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate requirements\u003c\/strong\u003e The substrate must be clean, stable, and free of separating substances. Weathered concrete or mortar surfaces and highly absorbent substrates must be pre-treated with a special primer. The primer consists of 1 part Cembond 956 (the super additive) and 3 parts water.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e Cembond MF 1041 is a dry mixture (powder) that is mixed with water. For this, you need a bucket and an electric mixer (drill with a mixing attachment). For 10 kg of powder, you need approx. 3.5 - 4.0 kg of water. First, create a paste and then add the remaining water gradually. The ready-to-apply paint must rest or mature for approx. 5 minutes after mixing. Then stir briefly once more and use immediately. The ready-to-apply paint is thixotropic and does not splatter. If the viscosity increases after some time, stir briefly again; this reverses the effect. Depending on the substrate and the tool used, the paint can also be further diluted.  Cembond paint has excellent coverage, and only rougher or visually high-quality surfaces require a second coat. The bright, pure white paint can also be tinted if required. Our ARCAN Mixol concentrates are available for this purpose. \u003cem\u003eAfter 3 hours, the setting process begins; the paint becomes stiffer and must no longer be diluted or processed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption: 0.4 - 0.7 kg\/m² depending on the substrate\u003c\/strong\u003e \u003cstrong\u003ePackaging: 10 kg powder, yields approx. 13.5 - 14.0 liters of paint\u003c\/strong\u003e \u003cstrong\u003eCoverage for a single coat 20 - 35m² depending on the substrate\u003c\/strong\u003e \u003cstrong\u003eColor beige\u003c\/strong\u003e \u003cstrong\u003eTools\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eclassic painting tools\u003c\/li\u003e\n\n\u003cli\u003ebrushed\u003c\/li\u003e\n\n\u003cli\u003esprayed (airless equipment nozzle at least 0.8 mm)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eClean tools thoroughly with water immediately after finishing work.  \u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357911208266,"sku":"1217","price":45.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Fl_C3_A4che-1041-e1571390917619_d7f5c897-59ac-443d-a421-a43252bcad21.jpg?v=1787841586"},{"product_id":"cembond-mineralfarbe-1041-schmutzabweisend-wasserabweisend-anti-schimmelfarbe-fuer-innen-und-aussen-10-kg-farbe-weiss","title":"Cembond mineral paint 1041 - dirt-repellent, water-repellent, anti-mold paint, for interior and exterior (10 kg), color white","description":"\u003cp style=\"text-align: left;\"\u003eCembond MF 1041 is the ultimate paint for indoor and outdoor use. The water- and dirt-repellent paint remains brilliantly white for years while ensuring a healthy indoor climate. Cembond MF 1041 can also be applied to damp walls and actively prevents mold growth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ebreathable - vapor-permeable\u003c\/li\u003e\n\n\u003cli\u003eno film formation\u003c\/li\u003e\n\n\u003cli\u003ewater-repellent\u003c\/li\u003e\n\n\u003cli\u003edirt-repellent\u003c\/li\u003e\n\n\u003cli\u003eodorless\u003c\/li\u003e\n\n\u003cli\u003eno solvents - no plasticizers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThis dirt-repellent paint is decorative and also provides protection for facades and interior surfaces. Cembond is suitable for all mineral building materials. Cembond mineral paint is perfect for high humidity, damp substrates, wet rooms, and areas highly prone to mold. Cembond sets through the hydraulic reaction of the cementitious binder without forming a film. Therefore, Cembond mineral paint does not hinder water vapor diffusion and does not flake off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eUV resistant\u003c\/li\u003e\n\n\u003cli\u003eWeatherproof\u003c\/li\u003e\n\n\u003cli\u003eFrost and thaw resistant\u003c\/li\u003e\n\n\u003cli\u003esuitable for underwater coatings\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e  \u003cstrong\u003eSuitable substrates:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMortar groups II and III (DIN 18 550)\u003c\/li\u003e\n\n\u003cli\u003eConcrete\u003c\/li\u003e\n\n\u003cli\u003eAerated concrete\u003c\/li\u003e\n\n\u003cli\u003eBrick\u003c\/li\u003e\n\n\u003cli\u003eSand-lime bricks\u003c\/li\u003e\n\n\u003cli\u003eNatural stone\u003c\/li\u003e\n\n\u003cli\u003eMineral sealing slurries\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e  \u003cstrong\u003eUnsuitable substrates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ePure gypsum plaster\u003c\/li\u003e\n\n\u003cli\u003eSurfaces with old oil or emulsion paint coatings\u003c\/li\u003e\n\n\u003cli\u003eglued wall coverings\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate requirements\u003c\/strong\u003e The substrate must be clean, load-bearing, and free of separating substances. Weathered concrete or mortar surfaces and highly absorbent substrates must be pre-treated with a special primer. The primer consists of 1 part Cembond 956 (the super additive) and 3 parts water.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e Cembond MF 1041 is a dry mixture (powder) that is mixed with water. You need a bucket and an electric stirrer (drill with mixer). For 10 kg of powder, you need approx. 3.5 - 4.0 kg of water. First, create a paste and then gradually add the remaining water. After mixing, the brushable paint must rest or \"mature\" for approx. 5 minutes. Then stir briefly again and apply immediately. The ready-to-use paint is thixotropic and does not splash. If the viscosity increases after some time, stir briefly again to reverse the effect. Depending on the substrate and the tool used, the paint can be further diluted.  Cembond paint provides excellent coverage; only rougher or visually very high-quality surfaces require a second coat. The brilliant pure white paint can also be tinted if required. Our ARCAN Mixol concentrates are available for this purpose. \u003cem\u003eThe setting process begins after 3 hours; the paint becomes stiffer and must not be diluted or processed further at this point.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption: 0.4 - 0.7 kg\/m² depending on the substrate\u003c\/strong\u003e \u003cstrong\u003ePackaging: 10 kg powder, yields approx. 13.5 - 14.0 liters of paint\u003c\/strong\u003e \u003cstrong\u003eCoverage for a single coat 20 - 35m² depending on the substrate\u003c\/strong\u003e \u003cstrong\u003eColor white\u003c\/strong\u003e \u003cstrong\u003eTools\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eclassic painting tools\u003c\/li\u003e\n\n\u003cli\u003ebrushed\u003c\/li\u003e\n\n\u003cli\u003esprayed (airless equipment nozzle at least 0.8 mm)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eClean tools thoroughly with water immediately after finishing work.  \u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357911241034,"sku":"1218","price":45.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Fl_C3_A4che-1041-e1571390917619_70f47a7b-d246-4d4b-bba2-1885848be870.jpg?v=1787841590"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/collections\/Kategorie-Wasserdichte-Farbe.png?v=1785357850","url":"https:\/\/shop.arcan.biz\/en\/collections\/wasserdichte-farbe.oembed","provider":"ARCAN GmbH Abdichtungen – Handwerkerstore","version":"1.0","type":"link"}