{"title":"Injection resins","description":"\u003cp\u003eInjection resins – Reliable sealing of cracks, joints and cavities\u003c\/p\u003e","products":[{"product_id":"hydrobloc-pu-500-quellfaehiges-polyurethan-injektionsharz","title":"HydroBloc PU 500 – swellable polyurethane injection resin","description":"Polyurethane injection resin, swellable\n\n\u003cstrong\u003eHydroBloc PU 500, the injection resin with a self-healing effect!\u003c\/strong\u003e Upon contact with water (after curing), the resin increases its volume by over 150%. HydroBloc PU-500 compensates for changes in the joint cross-section even years after injection. Classic rigid resins without a swelling effect cannot do this.\n\nAreas of application for HydroBloc PU 500\n\u003cul\u003e\n\n \t\u003cli\u003eJoints\u003c\/li\u003e\n\n \t\u003cli\u003eCracks\u003c\/li\u003e\n\n \t\u003cli\u003eGravel pockets\u003c\/li\u003e\n\n \t\u003cli\u003eInjection hoses\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\nPU-500 is a classic 2-component resin. The mixing ratio of the two components is 1:1 by volume. Due to the long pot life, the material can also be processed with a 1-component pump.\n\nThe pot life is approx. 70 - 100 minutes at 20°C; by adding activators (HydroCat 508 and HydroCat 509), the setting time can be shortened to 120 seconds, thus also allowing for the stopping of water flowing under pressure.\n\n \n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Mixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e 1 : 1 by volume\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Density, mixed\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 1.10 - 1.15 g\/ml (at 20°)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, mixed\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 220 cSt +\/- 30% (at 20°)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Pot life\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 65 - 100 minutes at 20°C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Elongation capacity\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 100% (cured)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eSystem accessories for HydroBloc PU 500 – swellable polyurethane injection resin:\u003c\/h2\u003e\nHydroSolv 520 – Cleaning and flushing agent for injection equipment\n\nHydroMoll 522 – Maintenance and preservation agent for injection equipment\n\nHydroBloc Micro-foam 510 – Water-stop foam, 1-component injection foam\n\nPackers\n\n\u003cstrong\u003eContainer: 2 kg\u003c\/strong\u003e","brand":"ARCAN","offers":[{"title":"2 kg","offer_id":62357902524746,"sku":"1003","price":37.69,"currency_code":"EUR","in_stock":true},{"title":"20.8 kg","offer_id":62357902557514,"sku":"1004","price":386.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Injektionssysteme-_C2_BB-PUR-Harze-_C2_BB-Hydrobloc-PU-500-e1445426569969.jpg?v=1782831142"},{"product_id":"hydrobloc-microschaum-510-wasserstopschaum-1k-injektionsschaum","title":"HydroBloc Microfoam 510 – Water-stop foam, 1K injection foam","description":"\u003cp\u003e\u003cstrong\u003eHydroBloc Foam Resin 510\u003c\/strong\u003e is a classic 1K injection foam with high reactivity. The 1K resin is activated with an accelerator (HydroCat 514) and then reacts very quickly with water, while expanding significantly, to form an elastic and dimensionally stable PU foam with fine, largely closed cells that does not shrink during curing.\u003c\/p\u003e\n\u003ch4\u003eTypical Applications\u003c\/h4\u003e\n\u003cp\u003eSealing injections; preferably as a rapid water stop for high-pressure flowing water in joints, cracks, crevices, and fissures in civil engineering and tunnel construction, or for the consolidation\/stabilization of scree and loose sand.\u003c\/p\u003e\n\u003ch4\u003eProcessing\u003c\/h4\u003e\n\u003cp\u003eHydroBloc Foam Resin 510 should be activated (accelerated) before processing. The amount added depends on the desired reaction time. 1–4% relative to the base resin is generally sufficient. The water-stop foam can thus be easily adapted to all construction requirements. Due to the highly effective activators, the product is very sensitive to contact with water in any form and reacts even with atmospheric humidity. Accelerated (activated) 510 is therefore no longer shelf-stable and should be used promptly. Delivery form: One component (base resin) Composition: Isocyanate prepolymers (polyurethane) Appearance: Clear, dark brown liquid Odor: Very faint, typical for the product Density: Approx. 1.10 – 1.15 g\/ml Viscosity: Approx. 200 – 260 mPa.s (at 20°C) Foam yield:* Approx. 40 liters per kg (free-foamed, ARCAN standard test)\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc Microfoam 510 – water-stop foam, 1K injection foam:\u003c\/h2\u003e\n\u003cp\u003eHydroSolv 520 – Cleaning and flushing agent for injection equipment HydroMoll 522 – Care and preservation agent for injection equipment Packers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents: 2.50 kg foam resin + HydroCat 0.125 kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #dc143c;\"\u003ePlease note that this product is supplied exclusively to commercial customers.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"1.05 kg","offer_id":62357902917962,"sku":"1005","price":32.41,"currency_code":"EUR","in_stock":true},{"title":"2,625 kg","offer_id":62357902950730,"sku":"1006","price":54.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-BauchemieAbdichtung-Injektionssysteme-PUR-Schaum-HydroBloc-Microschaum-510-e1443534241852.jpg?v=1788183647"},{"product_id":"hydrosoil-517-verfestigung-und-hz-sperre","title":"HydroSoil 517 – Stabilization and Capillary Barrier","description":"\u003cp\u003eLow-viscosity injection resin for consolidation and stabilization, as well as a capillary-blocking horizontal barrier\u003cb\u003e\u003cspan style=\"font-family: 'Verdana'; font-size: 8pt; font-weight: bold;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHydroSoil-517 is a reactive binder with very low viscosity. \u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"font-family: 'Verdana'; font-size: 8pt; font-weight: bold;\"\u003eThe product is used to consolidate and seal porous building materials as well as to stabilize soil and fine-grained sand. The product is pre-formulated and ready to use.\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"font-family: 'Verdana'; font-size: 8pt;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Verdana'; font-size: 8pt;\"\u003eAfter injection or introduction\/mixing with soil\/sand, HS-517 cures through contact with the trace amounts of water always present in the substrate to form tough, highly chemically resistant polyureas with excellent adhesive properties. \u003c\/span\u003e \u003cspan style=\"font-family: 'Verdana'; font-size: 8pt;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Verdana'; font-size: 8pt; font-weight: bold;\"\u003e\u003cspan style=\"font-family: 'Verdana'; font-size: 8pt;\"\u003eThe product is not intended for crack injection. However, HydroSoil-517 can be used very successfully to stabilize, consolidate, and seal porous, leached, and friable mortar and similar structures in mineral building materials, or to create horizontal barriers against rising damp in porous building materials. Application is carried out according to standard injection methods via injection ports (so-called \"packers\") arranged in a grid.\u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Mixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e Ready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Density\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 1.10 g\/ml (at 20°C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 60 mPa.s (at 20°C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Pot life\u003c\/td\u003e\n\n\u003ctd\u003e no classic t-gel\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Elongation\u003c\/td\u003e\n\n\u003ctd\u003e -\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSystem accessories for HydroSoil 517 – low-viscosity polyurethane injection resin:\u003c\/h2\u003e\n\u003cp\u003eHydroSolv 520 – Cleaning and flushing agent for injection equipment HydroMoll 522 – Care and preservation agent for injection equipment Packers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContainer size: 11\u003c\/strong\u003e\u003cstrong\u003e kg\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357903016266,"sku":"1012","price":176.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Platzhalter-Produktfoto.jpg?v=1785948822"},{"product_id":"hydrobloc-polygel-530-acrylat-gel-fuer-hinterlegungsinjektionen-28-kg","title":"HydroBloc Polygel 530 – Acrylate gel for curtain injections (28 kg)","description":"\u003cp\u003eAcrylate gel for sealing work, curtain injections, and exterior membrane injections. HydroBloc Polygel 530 is a low-viscosity, water-miscible, highly reactive injection agent. It is produced from special acrylic compounds using a proprietary ARCAN process. After mixing with the reaction initiator, HydroBloc-530 reacts to form a highly elastic hydrogel, a water-containing plastic. \u003cstrong\u003eUser-friendly due to flexible reaction speed. With one product, you can achieve times from 10 seconds to 120 minutes.\u003c\/strong\u003e HydroBloc Polygel 530 is chemically very resistant and does not age. Since it is not susceptible to microorganisms, it is also perfectly suited for use in sewage treatment plants. \u003cstrong\u003eThe many advantages of HydroBloc Polygel 530 -\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable width=\"453\" style=\"height: 137.157px;\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\n\u003ctd style=\"height: 19.5938px;\"\u003e ˜ \u003cstrong\u003eWater-like low viscosity\u003c\/strong\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\n\u003ctd style=\"height: 19.5938px;\"\u003e ˜ \u003cstrong\u003eExcellent penetration - even into the finest pores\u003c\/strong\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\n\u003ctd style=\"height: 19.5938px;\"\u003e ˜ \u003cstrong\u003eControlled volume increase (swelling) in water\u003c\/strong\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\n\u003ctd style=\"height: 19.5938px;\"\u003e ˜ \u003cstrong\u003eVariable and easily adjustable reaction times\u003c\/strong\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\n\u003ctd style=\"height: 19.5938px;\"\u003e ˜ \u003cstrong\u003eEasiest application\u003c\/strong\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\n\u003ctd style=\"height: 19.5938px;\"\u003e ˜ \u003cstrong\u003eHigh chemical and mechanical resistance\u003c\/strong\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAreas of application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSurface sealing in construction and as an exterior membrane injection between the structure and the soil\u003c\/li\u003e\n\n\u003cli\u003eGravel nests in concrete and porous masonry\u003c\/li\u003e\n\n\u003cli\u003eSewage pipes\u003c\/li\u003e\n\n\u003cli\u003eBase sealing of excavation pits\u003c\/li\u003e\n\n\u003cli\u003eStabilization of non-cohesive sands\u003c\/li\u003e\n\n\u003cli\u003eEncapsulation of contaminated soils such as landfills.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eGels contain water and should therefore only be used in permanently damp areas to prevent them from drying out. Dried-out gel bodies made of HydroBloc Polygel will absorb water immediately upon renewed contact and swell back to their original volume. HydroBloc Polygel consists of multiple components and can be processed with a 1-component pump for long reaction times and with a 2-component pump for short reaction times. The mixing instructions can be found under the additional information for this product. The accelerator is added to the base component, and the reaction initiator is added to the B component, which consists of water. After this mixing process, a 2-component product is obtained, which is processed using 1- or 2-component technology depending on the reaction time.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProperties of HydroBloc©-Polygel 530 – Acrylate gel for exterior membrane injections\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ctable style=\"height: 800px;\" width=\"600\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eComposition\u003c\/td\u003e\n\n\u003ctd\u003eAcrylic and methacrylic monomers dissolved in water\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eColor\u003c\/td\u003e\n\n\u003ctd\u003eBlue-green, translucent liquid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOdor\u003c\/td\u003e\n\n\u003ctd\u003eFaint, fruity\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDensity\u003c\/td\u003e\n\n\u003ctd\u003eapprox. 1.15-1.17 g\/ml\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH\u003c\/td\u003e\n\n\u003ctd\u003e5.3 - 6.0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRefractive index\u003c\/td\u003e\n\n\u003ctd\u003e1.40 - 1.50\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\n\u003ctd\u003eapprox. 3.2 mPa.s (injection mixture, 1:1 with water)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBoiling point\u003c\/td\u003e\n\n\u003ctd\u003e100°C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePour point\u003c\/td\u003e\n\n\u003ctd\u003e\u0026gt; -20°\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eFlash point\u003c\/td\u003e\n\n\u003ctd\u003eNon-flammable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWater permeability coefficient\u003c\/td\u003e\n\n\u003ctd\u003e\u0026gt;10\u003csup\u003e-10\u003c\/sup\u003e m\/sec.*\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLD50 (rat)\u003c\/td\u003e\n\n\u003ctd\u003e\u0026gt; 5000 mg\/kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eKTW guidelines (Germany)\u003c\/td\u003e\n\n\u003ctd\u003eCompliant (tested by Hygiene-Institut Gelsenkirchen)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eEU occupational safety guidelines\u003c\/td\u003e\n\n\u003ctd\u003eNo labeling required (!)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eADR \/ RID \/ IATA\u003c\/td\u003e\n\n\u003ctd\u003eN\/A (No restrictions)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e*Determined on an injection mixture 1:1 with water, in sand\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSystem accessories for HydroBloc©-Polygel 530 – Acrylate gel for exterior membrane injections\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eHydroCat 546 – Accelerator for the acrylate gel HydroBloc Polygel 530 HydroCat 548 – Accelerator for the acrylate gel HydroBloc Polygel 530 HydroX 549 – Reaction initiator for the acrylate gel HydroBloc Polygel 530 Seal Fix Expansion Mortar 930 for sealing injection boreholes Silex Suspension 931 – application-optimized injection mortar for cavity filling \u003cstrong\u003eContent: 28 kg\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357903769930,"sku":"1017","price":276.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Abdichtung-_C2_BB-Injektionssysteme-_C2_BB-Acrylat-Gel-_C2_BB-HydroBloc_C2_A9-Polygel-530-_E2_80_93-Acrylat-Gel-f_C3_BCr-Hinterlegungsinjektionen-28-kg-e1447147088861.jpg?v=1782831167"},{"product_id":"hydrobloc-injekt-583-quellfaehiges-acrylat-harz-acrylharz-mit-aktivem-korrosionsschutz-20-kg","title":"HydroBloc Injekt 583 – swellable acrylate resin (acrylic resin) with active corrosion protection (20 kg)","description":"\u003cp\u003eInjection resin, hydrophilic, water-miscible and swellable A universally applicable, swellable acrylate resin\/injection resin (\"\u003cstrong\u003eacrylic resin\u003c\/strong\u003e\"). HydroBloc Injekt 583 is low-viscosity and swells in water once cured. It contains a \u003cstrong\u003ecorrosion protection component that actively protects reinforcing steel\u003c\/strong\u003e. HydroBloc-Injekt 583 is a hybrid resin manufactured using a proprietary ARCAN process. Accelerated Injekt 583 can even be applied at sub-zero temperatures. HydroBloc - Injekt 583 is extremely durable. Due to its special structure, the product is extraordinarily resistant to chemical and biological influences and is therefore also suitable for sealing under difficult conditions - e.g., in biogas and sewage treatment plants.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eActive corrosion protection for reinforcing steel\u003c\/li\u003e\n\n\u003cli\u003eMachine cleaning with water\u003c\/li\u003e\n\n\u003cli\u003eFor re-injectable injection hoses\u003c\/li\u003e\n\n\u003cli\u003eApplication possible below 0°C\u003c\/li\u003e\n\n\u003cli\u003eKTW tested\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for sewage treatment plants\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDue to the simple 1:1 mixing ratio, \u003cstrong\u003eInjekt 583\u003c\/strong\u003e can also be processed with standard 2-component machines that dose at a 1:1 ratio. The reaction time of the resin - approx. 50-60 minutes at 20°C in its supplied form - can be shortened if necessary with HydroCat activators to achieve shorter setting times (as fast as 2-3 minutes is possible). The viscosity of HydroBloc-Injekt is low. Although it is formulated to be slightly thixotropic, its flow behavior during injection is excellent, allowing it to penetrate even the finest hairline cracks and porous structures, filling and sealing them securely and completely. Its ability to swell upon contact with water and its hydrophilic formulation are the most important advantages of HydroBloc-Injekt 583. Through typical, controlled swelling, \u003cstrong\u003eInjekt 583\u003c\/strong\u003e compensates for changes in crack or joint cross-sections, even after years. Furthermore, the hydrophilic, water-friendly character of the resin prevents unwanted side reactions with water, such as the typical foaming seen with PUR resins. In addition, it guarantees the typical excellent wetting and adhesion even on damp substrates. The product is frost-sensitive and can only be shipped at temperatures \u0026gt;5°C.\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc®-Injekt 583 – swellable acrylate resin (acrylic resin) with active corrosion protection\u003c\/h2\u003e\n\u003cp\u003eStein Rein 915 – highly effective cleaning concentrate BlocSil 790 Integral – transparent sealer with UV protection \u003cstrong\u003eContainer: 20 kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe material is frost-sensitive and must NOT be transported or stored at temperatures below 5°C.\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357903999306,"sku":"1026","price":376.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-BAuchemie-Abdichtung-_C2_BB-Injektionssysteme-_C2_BB-PUR-_C2_BB-HydroBloc_C2_AE-Injekt-583-e1444302238214.jpg?v=1782831187"},{"product_id":"hydrobloc-polygrout-650-polyurethan-gel-fuer-hinterlegungsinjektionen-25-kg","title":"HydroBloc Polygrout-650 – Polyurethane gel for curtain injections (25 kg)","description":"\u003cp\u003eConcentrated PUR gel as a highly elastic, swellable sealant. HydroBloc Polygrout-650 is a hydrophilic, water-reactive PU prepolymer. The product is easily miscible with water. This spontaneously creates emulsions with very low viscosity that set quickly into highly elastic hydrogels. The reaction products are water-containing plastics. They are mechanically stable, elastic, tear-resistant, and swell in a defined manner upon contact with water. Their adhesion to almost all substrates is excellent. At mixing ratios of HydroBloc-650 to water \u003cu\u003e\u0026lt;\u003c\/u\u003e 1:4, the mixture expands to form fine-celled foams. The foam volume depends on the amount of water mixed in, reaching its maximum at a ratio of Polygrout-650 to water of 1:1. Reaction products with water proportions \u003cu\u003e\u0026gt;\u003c\/u\u003e 1:4 react to form homogeneous products. The strength of the reaction products decreases as the water content increases. Optimal results are achieved with mixtures of 5 to 10 parts water to one part HydroBloc-Polygrout 650. Mixtures with more than 15 parts water to one part Polygrout-650 are no longer usable. One product, different properties\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFine-celled foam\u003c\/li\u003e\n\n\u003cli\u003eHomogeneous gel without foam formation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e  Like all gels, HydroBloc Polygrout 650 can be used as a sealant anywhere the affected areas are permanently damp and the injected sealant cannot dry out. \u003cstrong\u003eAreas of application for HydroBloc Polygrout 650\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eLeaks in structures and geological formations\u003c\/li\u003e\n\n\u003cli\u003eCurtain or backing injection\u003c\/li\u003e\n\n\u003cli\u003eExternal waterproofing of underground components and surfaces\u003c\/li\u003e\n\n\u003cli\u003ePipe joints\u003c\/li\u003e\n\n\u003cli\u003eSewers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eHydroBloc Polygrout 650 is mixed with water and injected using a high-pressure process. The rapid reaction between resin and water generally necessitates the use of injection pumps with suitable or adjustable mixing ratios for the two components, base resin and water. Mixing itself takes place directly at the injection point by bringing both components together in a static mixer as the mixing element. Additives to the resin component are not necessary. HydroBloc-Polygrout 650 is easy to process and simple to handle. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct properties of HydroBloc Polygel 530\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eCharacteristics:\u003c\/strong\u003e Polymeric diisocyanate (PUR prepolymer) \u003cbr\u003e\u003cstrong\u003eDelivery form: \u003c\/strong\u003eReady-to-use liquid \u003cbr\u003e\u003cstrong\u003eColor: \u003c\/strong\u003eYellow, clear or slightly cloudy \u003cbr\u003e\u003cstrong\u003eOdor:\u003c\/strong\u003e Weak, typical \u003cbr\u003e\u003cstrong\u003eViscosity: \u003c\/strong\u003e800 - 1600 mPa.s (20°C) \u003cbr\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e Approx. 1.1 g\/ml (20°C)   \u003cstrong\u003e  \u003cbr\u003e\u003cbr\u003eLabeling\u003c\/strong\u003e \u003cbr\u003e-Ordinance on Hazardous Substances\u003cbr\u003eXn -Transport (ADR\/RID)            \u003cbr\u003eUN number: 2078, UN Packing Group III -VOC\u003cbr\u003e 0 -VbF Not applicable\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc® Polygrout-650 – Polyurethane gel for backing injections\u003c\/h2\u003e\n\u003cp\u003eHydroSolv 520 – Cleaning and flushing agent for injection systems HydroMoll 522 – Care and preservation agent for injection systems Injection packers for the grouting of injection resins Seal Fix expansion mortar 930 for sealing injection boreholes HydroBloc Waterplug 932 – Water-stop mortar for sealing water ingress \u003cstrong\u003eContent: 25 kg\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357904130378,"sku":"1027","price":862.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Abdichtung-_C2_BB-Injektionssysteme-_C2_BB-PUR-Gel-_C2_BB-HydroBloc_C2_AE-Polygrout-650-_E2_80_93-Polyurethan-Gel-f_C3_BCr-Hinterlegungsinjektionen-25-kg-e1447147001743.jpg?v=1782831187"},{"product_id":"silox-ep-800-duennfluessiges-epoxydharz-fuer-injektionen-moertel-und-versiegelungen","title":"Silox EP 800 – low-viscosity epoxy resin for injections, mortars, and sealings.","description":"\u003cp\u003eSilox EP-800 is an application-optimized epoxy resin for construction applications.\u003c\/p\u003e\n\u003ch4\u003eProperties\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003elow viscosity yet solvent-free\u003c\/li\u003e\n\n\u003cli\u003elong pot life yet rapid curing\u003c\/li\u003e\n\n\u003cli\u003every good adhesion, even on damp substrates\u003c\/li\u003e\n\n\u003cli\u003eexcellent penetration, even into the finest pores and structures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eEP-800 is a versatile resin and problem-solver. Compared to conventional epoxy resins, this product is characterized above all by an extraordinarily low surface tension and superior wetting, even on difficult substrates.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStructural filling and sealing of joints and cracks via injection, gravity-fed methods, or stitching. Repairing cracked screeds by stitching with screed connectors is ideal. By injecting and impregnating the structure with EP-800, the compressive and tensile strength of masonry with insufficient load-bearing capacity or of crushed-stone, tamped, and single-grain concrete is significantly improved. For exposed concrete, gravity-fed injections with SILOX EP-800 reliably fill and seal cracks (including hairline cracks) so that no contaminants can penetrate to damage the concrete or reinforcement steel. Hollow-lying bonded screeds or slab coverings (even on facades!) are stabilized by low-pressure or vacuum injection with SILOX-EP 800 and permanently bonded to the substrate in a structurally sound manner. Industrial floors, floor areas in warehouses, garages, or similar surfaces can be impregnated or sealed by one or more treatments with EP-800. This creates highly abrasion-resistant, dust-free, and liquid-tight surfaces. Mixtures of (dry) quartz flour or sand and Silox EP-800 produce synthetic resin mortars with extremely high strength. Such mortars are typically used for repairing damaged concrete floor surfaces, grouting anchor bolts or machine foundations, as trowel-applied repair or adhesive mortars, and similar applications where high strength and a structural bond between concrete, stone, and\/or metal are required.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eSILOX-EP 800 is a classic \"two-component system\" consisting of resin and hardener. Once mixed, both components react to form a tough-hard epoxy polymer. The mixing ratio of the components (Resin \"A\" + Hardener \"B\") is 2:1 (by volume). Before processing, both components are added as usual to a clean and dry container and mixed homogeneously by stirring with a mixing device (e.g., a drill with a mixing paddle)*, decanted, and stirred again. After mixing, it can be processed immediately. *Stirring by hand is not sufficient!\u003c\/p\u003e\n\u003ch4\u003eIMPORTANT\u003c\/h4\u003e\n\u003cp\u003eOnly ever mix as much material as can be processed within a reasonable amount of time. The reaction between resin and hardener that begins immediately after mixing is exothermic (releases heat). This heating triggers a self-acceleration of the reaction (as with all reactive resins!) – this drastically shortens the processing time for larger mixtures. High ambient and material temperatures also influence (shorten) the processing time! Low temperatures delay the curing of EP resins, and at ambient temperatures \u0026lt; 6°C, the setting reaction stops. The resin can be processed with all pumps and presses commonly used in injection technology, can be applied to surfaces by rolling with plush rollers, via standard spraying methods, etc., and places no special demands on the materials of machines and equipment. Form of delivery: 2 components Mixing ratio: 2:1 parts by volume (A:B) Density (mixture A+B): 1.03 +\/- 0.1 at 20°C Viscosity (mixture A+B): 140 m +\/- 50 mPa.s at 20° Processing time (gel time): 40-50 minutes at 20° Processing limits: +8 to +35°C Elongation: Approx. 10%\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for Silox EP 800 – low-viscosity epoxy resin for injections, mortars, and sealants\u003c\/h2\u003e\n\u003cp\u003eHydroBloc®-Compri-Foam 130 – controlled filling of cavities with injection resins HydroBloc-Trennfix 480 – protective coating against contamination with injection resins Packer PK-6 – injection packer for the grouting of injection resins Screed connectors 75 – for clamping or stitching screeds \u003cbr\u003e\u003cstrong\u003eContent:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e1.5 kg\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e1.5 kg incl. connectors\u003c\/li\u003e\n\n\u003cli\u003e15 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"3.31 lbs","offer_id":62357904523594,"sku":"1047","price":43.07,"currency_code":"EUR","in_stock":true},{"title":"1.5 kg incl. staples","offer_id":62871600955722,"sku":null,"price":56.46,"currency_code":"EUR","in_stock":true},{"title":"15 kg","offer_id":62357904556362,"sku":"1048","price":317.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Injektionssysteme-Epoxyd-Harz-Silox-EP-800-e1443537326561.jpg?v=1782831206"},{"product_id":"hydrobloc-575-integral-verarbeitungsfertiges-pur-injektionsharz-6-5-kg","title":"HydroBloc 575 Integral - ready-to-use PUR injection resin","description":"\u003cp\u003e\u003cstrong\u003eHydroBloc 575 Integral \u003c\/strong\u003eis a ready-to-use PUR injection resin for waterproofing via injection.\u003c\/p\u003e\n\u003ch4\u003eThe Integral grades consist of only one component and do not need to be mixed or accelerated.\u003c\/h4\u003e\n\u003cp\u003eIntegral resins are supplied ready-to-use; due to their integrated hardener function, they react upon contact with the building material and set rapidly – even at low temperatures (!). However, the resins remain liquid inside the injection machine. There are no restrictions due to \"pot life,\" and the time-consuming flushing of machines during work breaks is eliminated. Mixing errors are a thing of the past, as are problems with gummed-up machines and clogged hoses caused by overly rapid reactions at high temperatures or failure to observe processing times. Expensive labor time, flushing agents, and solvents are saved, making application much easier and safer.\u003c\/p\u003e\n\u003ch4\u003eTypical Applications\u003c\/h4\u003e\n\u003cp\u003eIntegral resins are injection resins for sealing cracks, honeycombs, construction joints, and injection hoses; in short, all the classic applications for which multi-component products were previously required.\u003c\/p\u003e\n\u003ch4\u003eHydroBloc 575 Integral is the highlight of the INTEGRAL range, a highly elastic, hydrophilic resin with very low viscosity.\u003c\/h4\u003e\n\u003cp\u003eLike all Integral resins, 575 features rapid through-curing and excellent adhesion to concrete. No foam is formed, even on damp substrates or in wet environments! Due to its fast setting reaction, 575-Integral is also suitable for directly stopping flowing water (minor water inflow) – without the usual pre-injection with a foam resin!\u003c\/p\u003e\n\u003ch4\u003eIMPORTANT: Set HydroBloc 575 is swellable in water.\u003c\/h4\u003e\n\u003cp\u003eThe resin independently compensates for volume changes in cracks and joints – the \"SELF-HEALING EFFECT\" of swellable ARCAN resins! The Integral resins cure through a hardener function integrated into the base resin; the reaction is triggered by even traces of water. The water (always) present in the environment—whether as residual moisture in mineral building materials or as humidity—is sufficient to start the reaction. Reactivity with water must be taken into account during processing; opened containers must always be sealed tightly immediately. The equipment used must be completely dry. Under no circumstances use equipment that has previously been used to process aqueous or water-containing products! Shelf life: 6 months\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc 575 Integral – ready-to-use swellable injection resin\u003c\/h2\u003e\n\u003cp\u003eHydroBloc®-Compri-Foam 130 – controlled filling of cavities with injection resins HydroBloc-Trennfix 480 – protective coating against contamination with injection resins Injection packers Seal Fix expansion mortar 930 for sealing injection boreholes Silex Suspension 931 – technically optimized injection mortar for cavity filling\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContainer sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cstrong\u003e1.3 kg\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003e3.2 kg\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003e6.5 kg\u003c\/strong\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eA product presentation can be found on YouTube under HydroBloc 575 Integral\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"1.3 kg","offer_id":63336778105162,"sku":null,"price":50.28,"currency_code":"EUR","in_stock":true},{"title":"3.2 kg","offer_id":62832533897546,"sku":"1025","price":101.63,"currency_code":"EUR","in_stock":true},{"title":"6.5 kg","offer_id":62832533930314,"sku":"1026","price":183.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Injektionssysteme-PUR-Integral-HydroBloc-575-Integral-Injektionsharz-e1443534290205_0d27dba5-85d1-45a4-813c-cc790232a675.jpg?v=1788190573"},{"product_id":"hydrobloc-microschaum-510-wasserstopschaum-1k-injektionsschaum-10-5-kg","title":"HydroBloc Microfoam 510 – Water-stop foam, 1K injection foam (10.5 kg)","description":"\u003cp\u003e\u003cstrong\u003eHydroBloc Foam Resin 510\u003c\/strong\u003e is a classic 1K injection foam with high reactivity. The 1K resin is activated with an accelerator (HydroCat 514) and then reacts very quickly with water, while expanding significantly, to form an elastic and dimensionally stable PU foam with fine, largely closed cells that does not shrink during curing.\u003c\/p\u003e\n\u003ch4\u003eTypical applications\u003c\/h4\u003e\n\u003cp\u003eSealing injections; preferably as a rapid water stop for strong, pressurized water flows in joints, cracks, crevices, and fissures in civil engineering, tunneling, or for the consolidation\/stabilization of rubble and loose sand.\u003c\/p\u003e\n\u003ch4\u003eProcessing\u003c\/h4\u003e\n\u003cp\u003eHydroBloc Foam Resin 510 should be activated (accelerated) prior to processing. The amount added depends on the desired reaction time. 1–4% relative to the base resin is generally sufficient. The water-stop foam can thus be very easily adapted to all structural requirements. Due to the highly effective activators, the product is very sensitive to contact with water in any form and reacts even with moisture in the air. Accelerated (activated) 510 is therefore no longer shelf-stable and should be processed soon. Form of delivery: One component (base resin) Composition: Isocyanate prepolymers (polyurethane) Appearance: Clear, dark brown liquid Odor: Very faint, typical for the product Density: Approx. 1.10 – 1.15 g\/ml Viscosity: Approx. 200 – 260 mPa.s (at 20°) Foam yield:* Approx. 40 liters per kg (free-foamed, ARCAN standard test) \u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc Microfoam 510 – water-stop foam, 1K injection foam:\u003c\/h2\u003e\n\u003cp\u003eHydroSolv 520 – Cleaning and flushing agent for injection equipment HydroMoll 522 – Maintenance and preservation agent for injection equipment Packers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContent: 2.50 kg foam resin + HydroCat 0.125 kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #dc143c;\"\u003ePlease note that this product is supplied exclusively to commercial customers.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":63347501826378,"sku":"1005-10","price":305.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-BauchemieAbdichtung-Injektionssysteme-PUR-Schaum-HydroBloc-Microschaum-510-e1443534241852.jpg?v=1788183647"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/collections\/Kategorie-Injektionharz.png?v=1785310727","url":"https:\/\/shop.arcan.biz\/en\/collections\/injektionsharz.oembed","provider":"ARCAN GmbH Abdichtungen – Handwerkerstore","version":"1.0","type":"link"}