{"title":"Joint sealing","description":"\u003ch1\u003e\u003cspan\u003ePermanently sealed expansion and construction joints\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eJoints are structurally necessary components of a building, yet simultaneously represent potential weak points for water ingress. Professional joint sealing systems ensure that construction, expansion, and connection joints remain permanently sealed and the functionality of the structure is preserved in the long term.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"hydrobloc-pu-500-quellfaehiges-polyurethan-injektionsharz","title":"HydroBloc PU 500 – swellable polyurethane injection resin","description":"Polyurethane injection resin, swellable\n\n\u003cstrong\u003eHydroBloc PU 500, the injection resin with a self-healing effect!\u003c\/strong\u003e Upon contact with water (after curing), the resin increases its volume by over 150%. HydroBloc PU-500 compensates for changes in the joint cross-section even years after injection. Classic rigid resins without a swelling effect cannot do this.\n\nAreas of application for HydroBloc PU 500\n\u003cul\u003e\n\n \t\u003cli\u003eJoints\u003c\/li\u003e\n\n \t\u003cli\u003eCracks\u003c\/li\u003e\n\n \t\u003cli\u003eGravel pockets\u003c\/li\u003e\n\n \t\u003cli\u003eInjection hoses\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\nPU-500 is a classic 2-component resin. The mixing ratio of the two components is 1:1 by volume. Due to the long pot life, the material can also be processed with a 1-component pump.\n\nThe pot life is approx. 70 - 100 minutes at 20°C; by adding activators (HydroCat 508 and HydroCat 509), the setting time can be shortened to 120 seconds, thus also allowing for the stopping of water flowing under pressure.\n\n \n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Mixing ratio\u003c\/td\u003e\n\n\u003ctd\u003e 1 : 1 by volume\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Density, mixed\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 1.10 - 1.15 g\/ml (at 20°)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, mixed\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 220 cSt +\/- 30% (at 20°)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Pot life\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 65 - 100 minutes at 20°C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Elongation capacity\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 100% (cured)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eSystem accessories for HydroBloc PU 500 – swellable polyurethane injection resin:\u003c\/h2\u003e\nHydroSolv 520 – Cleaning and flushing agent for injection equipment\n\nHydroMoll 522 – Maintenance and preservation agent for injection equipment\n\nHydroBloc Micro-foam 510 – Water-stop foam, 1-component injection foam\n\nPackers\n\n\u003cstrong\u003eContainer: 2 kg\u003c\/strong\u003e","brand":"ARCAN","offers":[{"title":"2 kg","offer_id":62357902524746,"sku":"1003","price":37.69,"currency_code":"EUR","in_stock":true},{"title":"20.8 kg","offer_id":62357902557514,"sku":"1004","price":386.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Injektionssysteme-_C2_BB-PUR-Harze-_C2_BB-Hydrobloc-PU-500-e1445426569969.jpg?v=1782831142"},{"product_id":"hydrobloc-injekt-583-quellfaehiges-acrylat-harz-acrylharz-mit-aktivem-korrosionsschutz-20-kg","title":"HydroBloc Injekt 583 – swellable acrylate resin (acrylic resin) with active corrosion protection (20 kg)","description":"\u003cp\u003eInjection resin, hydrophilic, water-miscible and swellable A universally applicable, swellable acrylate resin\/injection resin (\"\u003cstrong\u003eacrylic resin\u003c\/strong\u003e\"). HydroBloc Injekt 583 is low-viscosity and swells in water once cured. It contains a \u003cstrong\u003ecorrosion protection component that actively protects reinforcing steel\u003c\/strong\u003e. HydroBloc-Injekt 583 is a hybrid resin manufactured using a proprietary ARCAN process. Accelerated Injekt 583 can even be applied at sub-zero temperatures. HydroBloc - Injekt 583 is extremely durable. Due to its special structure, the product is extraordinarily resistant to chemical and biological influences and is therefore also suitable for sealing under difficult conditions - e.g., in biogas and sewage treatment plants.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eActive corrosion protection for reinforcing steel\u003c\/li\u003e\n\n\u003cli\u003eMachine cleaning with water\u003c\/li\u003e\n\n\u003cli\u003eFor re-injectable injection hoses\u003c\/li\u003e\n\n\u003cli\u003eApplication possible below 0°C\u003c\/li\u003e\n\n\u003cli\u003eKTW tested\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for sewage treatment plants\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDue to the simple 1:1 mixing ratio, \u003cstrong\u003eInjekt 583\u003c\/strong\u003e can also be processed with standard 2-component machines that dose at a 1:1 ratio. The reaction time of the resin - approx. 50-60 minutes at 20°C in its supplied form - can be shortened if necessary with HydroCat activators to achieve shorter setting times (as fast as 2-3 minutes is possible). The viscosity of HydroBloc-Injekt is low. Although it is formulated to be slightly thixotropic, its flow behavior during injection is excellent, allowing it to penetrate even the finest hairline cracks and porous structures, filling and sealing them securely and completely. Its ability to swell upon contact with water and its hydrophilic formulation are the most important advantages of HydroBloc-Injekt 583. Through typical, controlled swelling, \u003cstrong\u003eInjekt 583\u003c\/strong\u003e compensates for changes in crack or joint cross-sections, even after years. Furthermore, the hydrophilic, water-friendly character of the resin prevents unwanted side reactions with water, such as the typical foaming seen with PUR resins. In addition, it guarantees the typical excellent wetting and adhesion even on damp substrates. The product is frost-sensitive and can only be shipped at temperatures \u0026gt;5°C.\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc®-Injekt 583 – swellable acrylate resin (acrylic resin) with active corrosion protection\u003c\/h2\u003e\n\u003cp\u003eStein Rein 915 – highly effective cleaning concentrate BlocSil 790 Integral – transparent sealer with UV protection \u003cstrong\u003eContainer: 20 kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe material is frost-sensitive and must NOT be transported or stored at temperatures below 5°C.\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357903999306,"sku":"1026","price":376.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-BAuchemie-Abdichtung-_C2_BB-Injektionssysteme-_C2_BB-PUR-_C2_BB-HydroBloc_C2_AE-Injekt-583-e1444302238214.jpg?v=1782831187"},{"product_id":"hydroflex-275-s-fuer-flexible-folienverbindungen","title":"HydroFlex-275-S for flexible film bonding","description":"\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm6\"\u003eSolvent welding agent for flexible foil joints\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1 tm6\"\u003e\u003cspan class=\"tm7\"\u003eThe HydroFlex 275 waterproofing system is an elastic foil sealant for sealing construction and expansion joints in structural and civil engineering, component connections, and wide cracks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1 tm6\"\u003e\u003cspan class=\"tm7\"\u003eSilipox Construction Adhesive 826 is used to bond HydroFlex sealing foils. \u003cstrong\u003eSilipox Construction Adhesive 826 is not suitable for the flexible connection of foil joints. \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm8\"\u003e\u003cspan class=\"tm9\"\u003eAll longitudinal and transverse connections between HydroFlex® tapes are made using HydroFlex 275-S. The HydroFlex® welding agent is a one-component, colorless, viscous liquid that creates a virtually inseparable bond between HydroFlex® foils. The tapes to be bonded are overlapped by approximately 5 cm in the bonding area, coated with the welding agent, joined immediately, and briefly weighted down. The welding agent reacts with the polymer, and the welded joint can be subjected to stress after a short time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eIMPORTANT:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"tm6\"\u003e The HydroFlex® welding agent is not suitable for bonding the tapes to other substrates. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/D-275-S-Kleber-fuer-Folienverbindungen.pdf?v=1787648760\" target=\"_blank\" title=\"HydroFlex 275 Abdichtungssystem PDF\" rel=\"noopener\"\u003eD-275-S adhesive for foil connections\u003c\/a\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908488522,"sku":"1139","price":24.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/275-s_Kanne_b078b857-df7a-456d-8049-dfec9a95bae7.jpg?v=1787649210"},{"product_id":"hydroflex-dichtband-275-10-klebefoliensystem-zur-abdichtung-von-fugen-und-rissen-10-cm-breit-rolle-25-m","title":"HydroFlex Sealing Tape 275.10 - Adhesive foil system for sealing joints and cracks. (10 cm wide, 25 m roll)","description":"\u003cstrong\u003eAdhesive tape for sealing joints and cracks\u003c\/strong\u003e\n\nHydroFlex 275 sealing tape is used to seal construction and expansion joints in structural and civil engineering, component connections, and also wide cracks.\n\nFilm waterproofing is suitable for new construction and renovation projects.\n\nThe HydroFlex 275 system consists of films in various widths made of an age-resistant thermoplastic elastomer and a special epoxy resin adhesive.\n\nIn addition to its high strength and very good substrate adhesion - even on wet concrete! - the adhesive is characterized above all by its exceptionally strong \"TACK,\" i.e., excellent initial adhesion and stickiness in the wet-fresh state.\n\nSealing by taping\n\u003cul\u003e\n\n\t\u003cli\u003eCracks\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction joints\u003c\/li\u003e\n\n\t\u003cli\u003eExpansion joints\u003c\/li\u003e\n\n\t\u003cli\u003ePrecast concrete elements and element walls\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\nSilox 826 adhesive also adheres to damp substrates and has very good initial adhesion, which greatly simplifies application.\n\nHydroFlex 275 sealing tapes are very stable with a thickness of 1.2 mm and are available in different widths.\n\nAvailable widths: 10 cm, 15 cm, 20 cm\n\u003ch2\u003eSystem accessories for HydroFlex 275.10 sealing tape - adhesive film system for sealing joints and cracks\u003c\/h2\u003e\nSilipox 826 FlexBand adhesive – adhesive film system for sealing\n\nCembond 945 M – surface waterproofing for mineral surfaces\n\nSilox 863 sealing slurry – universal waterproofing and coating compound\n\nDuroFlex M 900 – liquid film for sealing concrete and screed\n\nSILOX 903DF – highly elastic liquid film for outdoor use\n\n\u003cstrong\u003eRoll length: 25 m\u003c\/strong\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908554058,"sku":"1140","price":104.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Arcan-Bauchemie-Abdichtung-_C2_BB-Folienabdichtung-Hydroflex-dichtband-275-wei_C3_9F-e1445430023736_8c070694-3037-4a6d-b869-388aaeac7e64.jpg?v=1787841411"},{"product_id":"hydroflex-dichtband-275-15-klebefoliensystem-zur-abdichtung-von-fugen-und-rissen-15-cm-breit-rolle-25-m","title":"HydroFlex Sealing Tape 275.15 - Adhesive foil system for sealing joints and cracks. (15 cm wide, 25 m roll)","description":"\u003cstrong\u003eAdhesive tape for sealing joints and cracks\u003c\/strong\u003e\n\nHydroFlex 275 sealing tape is used to seal construction and expansion joints in structural and civil engineering, component connections, and even wide cracks.\n\nMembrane seals are suitable for both new construction and renovation projects.\n\nThe HydroFlex-275 system consists of membranes in various widths, made from an age-resistant thermoplastic elastomer, and a special epoxy resin adhesive.\n\nIn addition to its high strength and excellent substrate adhesion—even on wet concrete!—the adhesive is characterized above all by its exceptionally strong \"TACK,\" i.e., outstanding initial adhesion and stickiness while wet.\n\n \n\nSealing by bonding\n\u003cul\u003e\n\n\t\u003cli\u003eCracks\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction joints\u003c\/li\u003e\n\n\t\u003cli\u003eExpansion joints\u003c\/li\u003e\n\n\t\u003cli\u003ePrecast concrete elements and prefab walls\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n \n\nSilox 826 adhesive also adheres to damp substrates and has very good initial tack, which significantly simplifies application.\n\nHydroFlex 275 sealing tapes are very robust with a thickness of 1.2 mm and are available in different widths.\n\nAvailable widths: 10 cm, 15 cm\n\u003ch2\u003eSystem accessories for HydroFlex 275.10 sealing tape - Adhesive membrane system for sealing joints and cracks\u003c\/h2\u003e\nSilipox 826 FlexBand adhesive – Adhesive membrane system for sealing\n\nCembond 945 M – Surface sealing for mineral surfaces\n\nSilox 863 sealing slurry – Universal sealing and coating compound\n\nDuroFlex M 900 – Liquid membrane for sealing concrete and screed\n\nSILOX 903DF – Highly elastic liquid membrane for outdoor use\n\n\u003cstrong\u003eRoll length: 25 m\u003c\/strong\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908619594,"sku":"1142","price":214.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Arcan-Bauchemie-Abdichtung-_C2_BB-Folienabdichtung-Hydroflex-dichtband-275-wei_C3_9F-e1445430023736_21c76cf9-2982-4e9c-a3b0-9cffacc8ef54.jpg?v=1787841417"},{"product_id":"hydroflex-dichtband-275-20","title":"Hydroflex Sealing Tape 275.20","description":"\u003cstrong\u003eAdhesive tape for sealing joints and cracks\u003c\/strong\u003e\n\nHydroFlex 275 sealing tape is used to seal construction and expansion joints in structural and civil engineering, component connections, and even wide cracks.\n\nFoil sealing systems are suitable for both new construction and renovation.\n\n \n\nThe HydroFlex-275 system consists of foils in various widths, manufactured from an aging-resistant thermoplastic elastomer, and a special epoxy resin adhesive.\n\nIn addition to its high strength and excellent substrate adhesion—even on wet concrete!—the adhesive is characterized above all by its exceptionally strong \"TACK,\" i.e., excellent initial adhesion and stickiness in a wet, fresh state.\n\n \n\nSealing by taping\n\u003cul\u003e\n\n \t\u003cli\u003eCracks\u003c\/li\u003e\n\n \t\u003cli\u003eConstruction joints\u003c\/li\u003e\n\n \t\u003cli\u003eExpansion joints\u003c\/li\u003e\n\n \t\u003cli\u003ePrecast concrete parts and element walls\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n \n\nSilox 826 adhesive also adheres to damp substrates and has very good initial adhesion, which greatly simplifies application.\n\nHydroFlex 275 sealing tapes are very stable with a thickness of 1.2 mm and are available in various widths.\n\nAvailable widths: 10 cm, 15 cm, 20 cm\n\nRoll length: 25 m","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908652362,"sku":"1144","price":268.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/Arcan-Bauchemie-Abdichtung-_C2_BB-Folienabdichtung-Hydroflex-dichtband-275-wei_C3_9F-e1445430023736_172f14a0-008f-4c0e-a95b-e6f1644c1998.jpg?v=1787841422"},{"product_id":"bentomastic-307-quellpaste-auf-bentonit-basis-kartusche-310-ml","title":"BentoMastic 307 – Bentonite-based swelling paste. (0.310 l cartridge)","description":"\u003cp\u003e\u003cstrong\u003eBentonite-based swelling paste for the installation of swelling tapes\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBentoMastic 307\u003c\/strong\u003e is a water-swelling sealant made from natural bentonite. It dries quickly and has good adhesion to the substrate. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBentoMastic 307\u003c\/strong\u003e is used for the reliable sealing of construction joints in concrete, for sealing wall penetrations in areas in contact with the ground, for joint filling in precast elements, and for similar applications where the swelling effect of activated bentonite can prevent the ingress of water into the structure.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eDelivery form : Sealant in cartridges\u003c\/li\u003e\n\n\u003cli\u003eColour : Dark grey to dark green\u003c\/li\u003e\n\n\u003cli\u003eDensity : Approx. 1.65 g\/ml\u003c\/li\u003e\n\n\u003cli\u003eBentonite content : 70 %\u003c\/li\u003e\n\n\u003cli\u003eLabelling : Flammable (“F”)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe material contains flammable solvents (flash point 21°C) and is labelled as flammable. During application, fire and open light must be avoided.\u003cstrong\u003e \u003c\/strong\u003e Contact with skin and mucous membranes should be avoided; in case of eye contact, flush with plenty of water for 15 minutes and then it is essential to consult a specialist. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBentoMastic 307\u003c\/strong\u003e should be stored in a cool, dry place out of the reach of children. Fire, open light, and radiant heat sources must be avoided. Storage together with food and luxury food items is not permitted. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1 cartridge of 0.310 l\u003cbr\u003e\u003c\/strong\u003e(\u003cspan\u003eYou can order a maximum of 4 BentoMastic 307 cartridges per DHL order. For a larger order, please select the following item: \u003ca href=\"https:\/\/zjmvpt-wk.myshopify.com\/products\/bentomastic-307-quellpaste-auf-bentonit-basis-kartusche-0-310-l-kopie?_pos=2\u0026amp;_psq=307\u0026amp;_psid=7678034c7\u0026amp;_ss=e\" title=\"BetonMastic 307 grosse Menge\"\u003eBentoMastic 307 6 pieces or more\u003c\/a\u003e \u003c\/span\u003e)\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908685130,"sku":"1146","price":10.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Fugenabdichtung-_C2_BB-Quellpaste-_C2_BB-BentoMastic-307-e1444302134249.jpg?v=1787841427"},{"product_id":"hydroseal-355-quellpaste-auf-pur-basis-kartusche-310-ml","title":"HydroSeal 355 – PUR-based swelling paste (0.310 l cartridge)","description":"HydroSeal 355 is a PUR-based swelling paste, also referred to as a \"swelling tape in a tube.\" It is highly elastic and water-swellable.\n\nHydroSeal 355 is a hydro-active setting sealant. Once cured, the product absorbs water and increases in volume. HydroSeal 355 consists of a special polyurethane rubber developed by ARCAN.\n\nWhen cured, HydroSeal is rubber-elastic, with very good mechanical strength and excellent adhesion to both wet and dry concrete and metal. Upon contact with water, HydroSeal 355 swells in proportion to the amount of water absorbed. HydroSeal 355 is used to simply and very efficiently seal construction and expansion joints, pipe penetrations, and similar problem areas in structures.\n\nDue to the swelling process and the resulting swelling pressure, seals made of HydroSeal 355 quickly adapt even to subsequent changes in joint cross-sections. Joint seals made of HydroSeal 355 are therefore—like many swellable ARCAN products—\"self-healing.\"\n\nHydroSeal 355 is used wherever water must be prevented from penetrating a structure. Application directly from the cartridge is simple. The soft, pasty, yet stable compound is very easy to process with any standard caulking gun.\n\u003ch4\u003eArea of application\u003c\/h4\u003e\n\u003cul\u003e\n\n \t\u003cli\u003eSealing of wall penetrations (pipes, cables, etc.) in areas of structures in contact with the ground.\u003c\/li\u003e\n\n \t\u003cli\u003eFunctionally reliable and easy-to-install seals in construction and casting joints—as a \"swelling tape from a cartridge.\"\u003c\/li\u003e\n\n \t\u003cli\u003eJoint sealing for precast concrete elements, pipes, and segments in earthworks and hydraulic engineering.\u003c\/li\u003e\n\n \t\u003cli\u003eAdhesive and leveling compound for swelling joint tapes—these are typical applications for this product.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\nHydroSeal 355 adheres excellently to almost all dry and matte-damp substrates that are free of grease and dust. Adhesion is limited on certain plastics (olefins such as PE or PP, copolymers). Since plastics are difficult for the layperson to identify, preliminary tests are always recommended when using plastics as a substrate.\n\nTo accelerate the curing process, it may be useful to dampen mineral substrates (concrete, stone, etc.) before application. However, for good adhesion of 355 to the substrate, the surfaces must not be glistening wet.\n\nA typical application for HydroSeal 355 is also the renovation of leaking expansion joints, e.g., in cases of peripheral or damaged joint tapes and pipe penetrations.\n\n\u003cstrong\u003e1 cartridge of 0.310 l, box of 12 pieces\u003c\/strong\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908750666,"sku":"1147","price":20.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Fugenabdichtung-Quellpaste-HydroSeal-355-Kartusche-Hydrotape-quellbander-e1443534226311.jpg?v=1787841429"},{"product_id":"injection-rund-402-0-injektionsschlauch-zur-abdichtung-von-arbeitsfugen-50-m-rolle","title":"Injection Round 402 – injection hose for sealing construction joints 50 m","description":"\u003cp\u003e\u003cstrong\u003eInjection 402\u003c\/strong\u003e is a cost-effective injection hose for sealing construction joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInjection 402\u003c\/strong\u003e consists of rubber granulate and features a porous wall through which the injection resin is released in a controlled manner. The hose is treated with a special impregnation that prevents cement paste from penetrating, adhering to, or sintering into the structure and the injection channel. This makes Injection 402 a very reliable system for sealing construction joints in concrete structures, suitable for all types of injection resins.\u003c\/p\u003e\n\u003ch4\u003eHandling and installation\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eInjection 402\u003c\/strong\u003e is installed centrally in the joint space or attached to waterstops, crack-inducing elements, sheet pile profiles, etc., and can be installed anywhere that concrete shrinkage may lead to gaps where water could penetrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInjection 402\u003c\/strong\u003e is supplied ready-to-install or as coiled stock. The pre-assembled hoses consist of 10 meters of injection hose and two 70 cm long connection pieces in different colors (\"grout ends\"). For the coiled stock, pre-assembled connection ends are supplied in sets that also include the necessary accessories (shrink sleeves and superglue). Pre-assembled hoses are easy to adjust on-site. To do this, the hose is shortened between the ends to the required length (a sharp knife or shears are sufficient), the remaining ends are joined with a connector sleeve and fixed with a drop of superglue. Well-thought-out accessories complement the hose and make installation easy even for inexperienced users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInjection 402\u003c\/strong\u003e is attached to the concrete using mounting clips; two types are available – one with a plug profile for drilled holes or a type for shooting (or nailing). The connection ends are secured in junction boxes, which are easily attached to the reinforcement and are readily accessible after the formwork is removed.\u003c\/p\u003e\n\u003ch4\u003eSystem accessories\u003c\/h4\u003e\n\u003cp\u003eMounting clip 416: Fiber-reinforced plastic clip, suitable for shooting or nailing. Mounting clip 425: Fiber-reinforced plastic clip with plug profile for drilled holes. Assembly kit 412: Contains pre-assembled connection ends in two colors, shrink sleeves, and superglue. Sufficient for the assembly of 10 injection hoses. Junction box 417: For the safe storage of grout ends. Easy installation on the reinforcement (behind the formwork). Grouting pliers 427: Quick-release pliers with integrated hose nozzle and connection nipple for sliding couplings. For a quick and secure connection between injection pumps and grout ends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eInjection round 402.0 - 50 m on a roll\u003c\/li\u003e\n\n\u003cli\u003eInjection round 402.1 - 5 pieces of 10 m each (pre-assembled)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"ARCAN","offers":[{"title":"50 m on roll 402.0","offer_id":62833282285898,"sku":"1154","price":142.21,"currency_code":"EUR","in_stock":true},{"title":"50 m assembled 402.1","offer_id":62833282253130,"sku":"1153","price":282.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Fugenabdichtung-_C2_BB-Injektionsschlauch-_C2_BB-Injection-402.0-rund-Rolle-e1444139838308.jpg?v=1787841450"},{"product_id":"proinject-403-0-wiederverpressbarer-injektionsschlauch-50-m-rolle","title":"ProInject 403 – re-injectable injection hose 50 m","description":"\u003cp\u003e\u003cstrong\u003eInjection hose - re-injectable\u003c\/strong\u003e PRO-Inject is a functionally reliable injection system for the subsequent sealing of construction joints in concrete structures. By injecting cement suspension or synthetic resins such as polyurethane, epoxy or acrylate resins, joints and defects in the concrete are sealed securely and permanently. Its simple and sophisticated design makes it technically superior to all other hose systems. Pro-Inject can be flushed out after each injection and used for further injections if required. \u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e is exceptionally flexible and therefore easy to install even around sharp corners, edges and offsets (even in winter!). The square cross-section of Pro-Inject guarantees excellent, uniform joint contact and thus optimal distribution of the injection agent - much better than conventional round injection hoses!\u003c\/p\u003e\n\u003cp\u003eWith \u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e, the tightness of the joint and thus the success of the injection can be verified.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eVacuumable – Re-injectable\u003c\/li\u003e\n\n\u003cli\u003eOptimal joint contact\u003c\/li\u003e\n\n\u003cli\u003eEasy installation due to flexibility and system accessories\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eTo utilize the full functionality of \u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e, we recommend the use of HydroBloc Inject 583. This injection resin is an acrylate system and can be flushed out of the hose with water after injection. This cleaning process allows Pro-Inject 403 to be re-injected. \u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e is supplied in rolls or pre-assembled ready for installation. \u003cstrong\u003eHandling and installation\u003c\/strong\u003e \u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e is installed centrally in the joint area or attached to waterstops, crack-inducing elements, sheet pile profiles, etc., and can be installed wherever shrinkage cracks occur due to the natural shrinkage of concrete and water can penetrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e is supplied pre-assembled ready for installation or in rolls. The pre-assembled hoses consist of 10 meters of injection hose and two 70 cm long connection pieces in different colors (\"injection ends\"). For the rolls, pre-assembled connection ends are supplied in sets, which also contain the necessary accessories (shrink sleeves and superglue). Pre-assembled hoses are easy and simple to customize on site. To do this, the hose is shortened between the ends by the appropriate length (a sharp knife or scissors are sufficient), the remaining ends are joined with a connecting sleeve and fixed with a drop of superglue. Sophisticated accessories complement the hose and make installation easy even for inexperienced installers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePro-Inject 403\u003c\/strong\u003e is attached to the concrete with mounting clips; two types are available – with a dowel profile for drill holes or a type for shooting (or nailing). The connection ends are secured in storage boxes, which are easily attached to the reinforcement and are easily accessible after formwork removal. \u003cstrong\u003eSystem accessories\u003c\/strong\u003e Mounting clip 414: Fiber-reinforced plastic clip, suitable for shooting or nailing. Mounting clip 415: Fiber-reinforced plastic clip with dowel profile for drill holes. Assembly set 413: Contains pre-assembled connection ends in two colors, shrink sleeves and superglue. Sufficient for assembling 10 injection hoses. Storage box 417: For safe storage of the injection ends. Simple installation on the reinforcement (behind the formwork). Injection pliers 427: Quick-release pliers with integrated hose nozzle and connection nipple for sliding couplings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariants:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eInjection round 403.0 - 50 m on roll\u003c\/li\u003e\n\n\u003cli\u003eInjection round 403.1 - 5 pieces of 10 m each (pre-assembled)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"ARCAN","offers":[{"title":"50 m on roll 403.0","offer_id":62833364500810,"sku":"1158","price":610.19,"currency_code":"EUR","in_stock":true},{"title":"50 m assembled 403.1","offer_id":62833364533578,"sku":"1159","price":706.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Fugenabdichtung-Injektionsschlauch-Pro-Inject-403-Injektionssysteme-e1443538706164.jpg?v=1787841461"},{"product_id":"quellschlauch-swellinjekt-405-quellbarer-injektionsschlauch-einbaufertig-konfektioniert","title":"Swellinjekt 405 – Swellable injection hose, swelling hose. (45 m, pre-assembled)","description":"Swellinjekt 405 is a swellable injection hose for sealing\nconstruction joints. Its dual function offers double the security.\n\nSwellinject 405 consists of an injection channel completely surrounded by HydroTape swelling rubber. The injection channel is securely embedded in the swelling tape, protecting it during the concreting process. Swellinject is quick and easy to install.\n\u003ch4\u003eProperties\u003c\/h4\u003e\n\u003cul\u003e\n\n \t\u003cli\u003eConstruction joint sealing and injection hose in one\u003c\/li\u003e\n\n \t\u003cli\u003eDouble security for high requirements\u003c\/li\u003e\n\n \t\u003cli\u003eQuick and easy installation\u003c\/li\u003e\n\n \t\u003cli\u003eSeals even before injection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eFunction\u003c\/h4\u003e\nSwellinject 405 is fastened in the construction joint before pouring the concrete. As the concrete shrinks during curing, the construction joint can become leaky. The swelling tape reliably and permanently seals this leakage. If necessary, the hose can be additionally injected to seal voids or cracks in the concrete.\n\u003ch4\u003eApplication\u003c\/h4\u003e\nReliable sealing of construction joints. It meets high technical requirements, with injection no longer being necessary in most cases. Swellinjekt 405 replaces conventional methods such as waterstop tapes or metal waterstops.\n\u003ch4\u003ePackaging\u003c\/h4\u003e\nSwellinjekt 405 is supplied ready to use with a length of 9 m. In addition, two injection ends of 70 cm each are pre-assembled on both sides of the hose.\n\u003ch4\u003eInstallation\u003c\/h4\u003e\nSwellinject 405 should be installed in the middle of the construction joint, inside the reinforcement. The black side must always face downwards.\n\nThere are two methods of fastening:\n\u003cul\u003e\n\n \t\u003cli\u003e\n\nMounting clip no. 414 for nailing\u003c\/li\u003e\n\n \t\u003cli\u003e\n\nMounting clip no. 415 for doweling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\nThe injection ends are stored in storage box 417 to ensure later access.\n\u003ch4\u003eInjection\u003c\/h4\u003e\nSuitable injection agents are HydroBloc PU 500, HydroBloc 575 Integral, and HydroBloc Injekt 583.\nIn principle, we do not recommend using foam resins or gels for the injection of injection hoses.\n\u003ch2\u003eSystem accessories for Swellinjekt 405 – Swellable injection hose, swelling hose\u003c\/h2\u003e\nAssembly kit 413\n\nMounting clip 414 – for mounting injection hose systems\n\nMounting clip 415 – for mounting injection hose systems\n\nStorage box 417 – For hose ends of injection hoses\n\nInjection pliers 427 – for injecting an injection hose\n\n\u003cstrong\u003eContent: 5 pieces of 9 m each\u003c\/strong\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357908980042,"sku":"1160","price":1119.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Fugenabdichtung-_C2_BB-Injektionsschlauch-_C2_BB-Quellschlauch-Swellinjekt-405-Karton-e1444139199813.jpg?v=1787841467"},{"product_id":"hydrocoll-kleber-430-zur-montage-der-quellbaender-kartusche","title":"HydroColl Adhesive 430 - for the installation of swelling tapes (0.310 l cartridge)","description":"\u003cp\u003e\u003cstrong\u003eHydroColl Adhesive 430\u003c\/strong\u003e is used for the installation of swellable waterstop tapes. This solvent-based paste has excellent adhesive properties and sets quickly. HydroColl 430 can be used when the concrete is smooth or has a fine-textured surface. For rough surfaces, please use HydroSeal 355 swelling paste.\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroColl Adhesive 430 - for the installation of swellable waterstop tapes\u003c\/h2\u003e\n\u003cp\u003eHydroTape Swellable Waterstop 250 – for watertight construction joints HydroTape Swellable Waterstop 251 – for watertight construction joints HydroSeal 355 – PUR-based swelling paste\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 cartridge of 0.310 l\u003cbr\u003e\u003c\/strong\u003e(\u003cspan\u003eYou can order a maximum of 3 HydroColl Adhesive 430 cartridges per DHL shipment. For a larger order, please select the following item: \u003ca href=\"https:\/\/zjmvpt-wk.myshopify.com\/products\/hydrocoll-kleber-430-zur-montage-von-quellbandern-kartusche-0-310-l-3-stuck\" title=\"3x HydroColl Kleber 430\"\u003eHydroColl Adhesive 430 from 3 pieces\u003c\/a\u003e)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357909537098,"sku":"1179","price":10.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Fugenabdichtung-Quellband-HydroColl-Kleber-430-Quellband-e1443534259981.jpg?v=1787841523"},{"product_id":"hydrobloc-575-integral-verarbeitungsfertiges-pur-injektionsharz-6-5-kg","title":"HydroBloc 575 Integral - ready-to-use PUR injection resin","description":"\u003cp\u003e\u003cstrong\u003eHydroBloc 575 Integral \u003c\/strong\u003eis a ready-to-use PUR injection resin for waterproofing via injection.\u003c\/p\u003e\n\u003ch4\u003eThe Integral grades consist of only one component and do not need to be mixed or accelerated.\u003c\/h4\u003e\n\u003cp\u003eIntegral resins are supplied ready-to-use; due to their integrated hardener function, they react upon contact with the building material and set rapidly – even at low temperatures (!). However, the resins remain liquid inside the injection machine. There are no restrictions due to \"pot life,\" and the time-consuming flushing of machines during work breaks is eliminated. Mixing errors are a thing of the past, as are problems with gummed-up machines and clogged hoses caused by overly rapid reactions at high temperatures or failure to observe processing times. Expensive labor time, flushing agents, and solvents are saved, making application much easier and safer.\u003c\/p\u003e\n\u003ch4\u003eTypical Applications\u003c\/h4\u003e\n\u003cp\u003eIntegral resins are injection resins for sealing cracks, honeycombs, construction joints, and injection hoses; in short, all the classic applications for which multi-component products were previously required.\u003c\/p\u003e\n\u003ch4\u003eHydroBloc 575 Integral is the highlight of the INTEGRAL range, a highly elastic, hydrophilic resin with very low viscosity.\u003c\/h4\u003e\n\u003cp\u003eLike all Integral resins, 575 features rapid through-curing and excellent adhesion to concrete. No foam is formed, even on damp substrates or in wet environments! Due to its fast setting reaction, 575-Integral is also suitable for directly stopping flowing water (minor water inflow) – without the usual pre-injection with a foam resin!\u003c\/p\u003e\n\u003ch4\u003eIMPORTANT: Set HydroBloc 575 is swellable in water.\u003c\/h4\u003e\n\u003cp\u003eThe resin independently compensates for volume changes in cracks and joints – the \"SELF-HEALING EFFECT\" of swellable ARCAN resins! The Integral resins cure through a hardener function integrated into the base resin; the reaction is triggered by even traces of water. The water (always) present in the environment—whether as residual moisture in mineral building materials or as humidity—is sufficient to start the reaction. Reactivity with water must be taken into account during processing; opened containers must always be sealed tightly immediately. The equipment used must be completely dry. Under no circumstances use equipment that has previously been used to process aqueous or water-containing products! Shelf life: 6 months\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroBloc 575 Integral – ready-to-use swellable injection resin\u003c\/h2\u003e\n\u003cp\u003eHydroBloc®-Compri-Foam 130 – controlled filling of cavities with injection resins HydroBloc-Trennfix 480 – protective coating against contamination with injection resins Injection packers Seal Fix expansion mortar 930 for sealing injection boreholes Silex Suspension 931 – technically optimized injection mortar for cavity filling\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContainer sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cstrong\u003e1.3 kg\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003e3.2 kg\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003e6.5 kg\u003c\/strong\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eA product presentation can be found on YouTube under HydroBloc 575 Integral\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"1.3 kg","offer_id":63336778105162,"sku":null,"price":50.28,"currency_code":"EUR","in_stock":true},{"title":"3.2 kg","offer_id":62832533897546,"sku":"1025","price":101.63,"currency_code":"EUR","in_stock":true},{"title":"6.5 kg","offer_id":62832533930314,"sku":"1026","price":183.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Injektionssysteme-PUR-Integral-HydroBloc-575-Integral-Injektionsharz-e1443534290205_0d27dba5-85d1-45a4-813c-cc790232a675.jpg?v=1788190573"},{"product_id":"hydrocoll-kleber-430-zur-montage-von-quellbandern-kartusche-0-310-l-1-karton","title":"HydroColl Adhesive 430 - for installing swellable waterstops (0.310 l cartridge) 1 box","description":"\u003cp\u003e\u003cstrong\u003eHydroColl Adhesive 430\u003c\/strong\u003e is used for the installation of swelling tapes. The solvent-based paste has excellent adhesive properties and sets quickly. HydroColl 430 can be used when the concrete is smooth or has a fine-textured surface. For rough surfaces, please use HydroSeal 355 swelling paste.\u003c\/p\u003e\n\u003ch2\u003eSystem accessories for HydroColl Adhesive 430 - for the installation of swelling tapes\u003c\/h2\u003e\n\u003cp\u003eHydroTape Swelling Tape 250 – for watertight construction joints HydroTape Swelling Tape 251 – for watertight construction joints HydroSeal 355 – PUR-based swelling paste\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12 cartridges of 0.310 l each\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(there are 12 pieces in one box)\u003c\/em\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":63279661941066,"sku":"1179-1","price":126.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Fugenabdichtung-Quellband-HydroColl-Kleber-430-Quellband-e1443534259981.jpg?v=1787841523"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/collections\/Kategorie-Fugenabdichtung_4403fbf8-3f96-45d4-ae80-c092cf735c10.png?v=1785357800","url":"https:\/\/shop.arcan.biz\/en\/collections\/fugenabdichtung.oembed","provider":"ARCAN GmbH Abdichtungen – Handwerkerstore","version":"1.0","type":"link"}