{"title":"Sealing slurry","description":"\u003cp\u003eSealing slurries are mineral-based waterproofing coatings used to protect concrete and masonry surfaces against water and moisture.\u003c\/p\u003e","products":[{"product_id":"hydrobloc-wps-750-wasserdichter-dekorativer-sperranstrich","title":"HydroBloc WPS 750 - waterproof, decorative barrier coating 15 kg","description":"\u003cp\u003eHydroBloc-WPS 750 is a waterproof, decorative barrier coating. The product can be used to coat damp or wet mineral substrates with minimal effort. Elaborate surface preparation is not required. Coatings with WPS-750 have a matte finish, are waterproof, and prevent unsightly efflorescence and water stains. Water vapor diffusion and thus the drying process are not hindered. HydroBloc-WPS coatings react with existing moisture, thereby anchoring themselves to the substrate. Typical applications for HydroBloc-WPS are decorative coatings on damp and wet concrete, masonry, or plaster, preferably after other waterproofing measures. HydroBloc-WPS coatings can replace elaborate dehumidifying plasters or be used as an additional decorative protective coat on such plasters.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eWPS-750 is supplied ready for use and can be applied using any standard painting techniques and methods. The substrates intended for coating must be clean and free of loose materials and separating agents. On wet surfaces, WPS-750 is applied with a block brush and distributed evenly using a cross-coating technique. Brushing works the paint more easily into the pores of the substrate and wets and displaces existing surface water better than is possible with rollers. Depending on the condition, moisture level, and roughness of the substrate, as well as aesthetic requirements, 2 coats are necessary to achieve a homogeneously closed, even surface. The second coat can be applied with a roller. When using sufficiently powerful equipment, WPS-750 can also be applied using airless sprayers. Subsequent coats can be applied either immediately after the previous coat has dried or after any length of time; there are no issues with inter-coat adhesion. HydroBloc-WPS 750 is pigmented pure white. If required, the product can be easily tinted in all pastel shades using standard universal tinting concentrates (e.g., \"MIXOL\" brand). The pigments used must be alkali-resistant; addition amounts should not exceed 5% of the base paint; preliminary tests are recommended. Tinting pastes for emulsion paints or dry pigments are not suitable for tinting. HydroBloc-WPS 750 contains mild-smelling, aromatic-free solvents. Therefore, ensure adequate ventilation during application. For cleaning application tools, we recommend our universally applicable safety solvent HydroSolv 520. Diluting or cleaning with water is not possible. Nevertheless, ensure that work areas are sufficiently ventilated.\u003c\/p\u003e\n\u003ch4\u003eProperties\u003c\/h4\u003e\n\u003cp\u003eMaterial base: Coating material made of special dissolved binders, fillers, and pigments State: Thixotropic, flowable paint Color: White Odor: Mild, solvent-like Density: Approx. 1.40 - 1.45 g\/ml \u003c\/p\u003e\n\u003ch4\u003eApplication Technical Data\u003c\/h4\u003e\n\u003cp\u003eConsumption per coat: Approx. 250 g\/m² for smooth substrates Processing temperature: \u0026gt; 5°C recommended\u003c\/p\u003e\n\u003ch2\u003eSystem Accessories for HydroBloc WPS 750 - waterproof, decorative barrier coating\u003c\/h2\u003e\n\u003cp\u003eHydroBloc Si 709 – Siloxane concentrate for horizontal barriers Cembond 945 M – Surface waterproofing for mineral surfaces\u003c\/p\u003e\n\u003ch4\u003e15 kg containers\u003c\/h4\u003e","brand":"ARCAN","offers":[{"title":"1 kg","offer_id":62357904425290,"sku":"1043","price":27.68,"currency_code":"EUR","in_stock":true},{"title":"15 kg","offer_id":62357904458058,"sku":"1044","price":203.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-Sanierfarbe-HydroBloc-WPS-750-Oberfl_C3_A4chenhydrophobierung-e1443537946241.jpg?v=1782831202"},{"product_id":"baudicht-914-die-ultimative-abdichtung-fuer-alle-bauwerke-50-kg","title":"Baudicht 914 - the ultimate waterproofing for all structures (50 kg)","description":"\u003cp class=\"Normal tm5\"\u003e\u003cspan class=\"tm6\"\u003e\u003cstrong\u003eBaudicht 914\u003c\/strong\u003e - the ultimate waterproofing for all structures. Reactive, highly elastic, easy to apply - perfectly watertight. Baudicht is the better alternative: made from a new, self-crosslinking polymer and functional additives, it combines the benefits of classic sealing slurries, bituminous thick coatings, and sprayable foils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht\u003c\/span\u003e\u003c\/strong\u003e \u003cspan class=\"tm6\"\u003e- highly elastic, stretchable, tear- and tensile-resistant, bridges cracks, and is light- and weather-resistant. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht\u003c\/span\u003e\u003c\/strong\u003e \u003cspan class=\"tm6\"\u003e- adheres excellently to practically all building materials, most metals, and damp substrates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht\u003c\/span\u003e\u003c\/strong\u003e \u003cspan class=\"tm6\"\u003e- is easy to process, by hand as a slurry, with a trowel\/notched trowel, or by spraying. Water is sufficient for thinning and cleaning equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht\u003c\/span\u003e\u003c\/strong\u003e \u003cspan class=\"tm9\"\u003e- \u003c\/span\u003e\u003cspan class=\"tm6\"\u003e dries after application, crosslinks in the process, and is then immediately rainproof. Coatings made from Baudicht are tough, homogeneous foils (membranes). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"tm8\"\u003e - \u003c\/span\u003e\u003cspan class=\"tm6\"\u003eis resistant to alkalis, weak acids, frost, de-icing salts, air pollutants, and other environmental influences.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht \u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"tm6\"\u003e- accelerates construction workflows due to its rapid reaction and drying. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eBaudicht\u003c\/span\u003e \u003c\/strong\u003e\u003cspan class=\"tm6\"\u003e- contains no solvents, no bitumen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm5 tm6\" style=\"text-align: left;\"\u003e\u003cspan class=\"tm8\"\u003eForm of supply\u003c\/span\u003e\u003cspan class=\"tm7\"\u003e     \u003c\/span\u003e\u003cspan class=\"tm7\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 285px;\" width=\"705\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eComponents \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003e2\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eAppearance component A    \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003egray, fine-particle solid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eAppearance component B\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003ereactive polymer rubber, liquid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eOdor\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003every faint, typical\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eMixing ratio A + B\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003e1 : 1 by weight\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eViscosity (mixed)\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eshear-thinning paste\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eThinner   \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eWater (tap water!)\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eBulk density  \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eapprox. 1.10 - 1.12 g\/ml\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003epH value \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eapprox. 11\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eConsumption \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm7\"\u003eapprox. 1.1 kg\/mm film thickness \u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ctable style=\"height: 78px;\" width=\"706\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd style=\"width: 345px;\"\u003e\u003cspan class=\"tm7\"\u003eGHS labeling  \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 345px;\"\u003e\u003cspan class=\"tm7\"\u003eCaution\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd style=\"width: 345px;\"\u003e\u003cspan class=\"tm7\"\u003eTransport restriction\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 345px;\"\u003e\u003cspan class=\"tm7\"\u003enone\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd style=\"width: 345px;\"\u003e\u003cspan class=\"tm7\"\u003eARCAN product no.\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 345px;\"\u003e\u003cspan class=\"tm7\"\u003e914\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"Normal tm5 tm6\" style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan class=\"tm8\"\u003eFully reacted product \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 305px;\" width=\"705\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eFilm formation \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eyes\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eColor\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003edark gray\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eDrying time\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003e16-18 h at 2 mm film thickness\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eCrack bridging (max.)\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\n\n\u003cspan class=\"tm12\"\u003e2 mm (at film thicknesses ≥ \u003c\/span\u003e\u003cspan class=\"tm12\"\u003e3 mm)\u003c\/span\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24.5px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24.5px;\"\u003e\u003cspan class=\"tm12\"\u003eWater pressure resistant\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24.5px;\"\u003e\u003cspan class=\"tm12\"\u003e10 m water column\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eSlot pressure test\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003epositive\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eDiffusion resistance µ \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003e1800 (water vapor)  \u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eStrengthening effect\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003e5 N\/mm² (substrate-dependent)\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eWater repellency \"w\"\u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\n\n\u003cspan class=\"tm14\"\u003e≤\u003c\/span\u003e\u003cspan class=\"tm12\"\u003e 0.5 kg\/m²*h 0.5\u003c\/span\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr style=\"height: 24px;\"\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003eVapor permeability  \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px; height: 24px;\"\u003e\u003cspan class=\"tm12\"\u003e≥ 90 %\u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ctable style=\"height: 26px;\" width=\"705\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd style=\"width: 344.5px;\"\u003e\u003cspan class=\"tm12\"\u003eGas tight (Radon) \u003c\/span\u003e\u003c\/td\u003e\n\n\u003ctd style=\"width: 344.5px;\"\u003e\u003cspan class=\"tm12\"\u003eat film thicknesses ≥ 3mm \u003c\/span\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp class=\"Normal tm9 tm6\" style=\"text-align: left;\"\u003e\u003cspan class=\"tm12\"\u003e                          \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm9 tm6\" style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan class=\"tm8\"\u003eApplication\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"Normal tm7\"\u003e\u003cspan class=\"tm11\"\u003eMix the liquid component well before mixing with the solid to homogenize. Add the solid to the liquid while stirring, ensuring that no dry material accumulates on the edges. Mix sufficiently long (approx. 3 minutes) with a slow-running agitator until the consistency of the mixture is even and homogeneous. When mixing partial quantities, do not change the A:B mixing ratio.\u003c\/span\u003e\u003cspan class=\"tm11\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Textk_rper tm10\"\u003e\u003cspan class=\"tm11\"\u003eDo not apply Baudicht 914 at temperatures below 5° C or above 30° C, in strong airflow, or in direct sunlight. Relative humidity during application should not exceed 95 %. As is customary in plastering practice, follow the shade when exposed to sunlight or (better) work in the morning or evening hours. To prevent rapid drying (\"burning\"), always thoroughly pre-wet surfaces heated by the sun!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Textk_rper tm6\"\u003e\u003cstrong\u003e\u003cspan class=\"tm7\"\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"tm8\"\u003e The maximum thickness for fresh Baudicht 914 applications is 5 mm. This must not be exceeded under any circumstances. Fresh, uncured coatings are sensitive to rain and frost. \u003c\/span\u003e\u003cspan class=\"tm8\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"Textk_rper tm6\"\u003e\u003cspan class=\"tm8\"\u003eAs with all cement-based building materials and plaster, rapid drying of the surface due to sunlight or strong drafts must be avoided. \u003c\/span\u003e\u003c\/p\u003e","brand":"ARCAN","offers":[{"title":"Default Title","offer_id":62357905244490,"sku":"1073","price":264.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/914-Sack.jpg?v=1782831237"},{"product_id":"cembond-945-m-flaechenabdichtung-fuer-mineralische-oberflaechen","title":"Cembond 945 M - Surface sealing for mineral surfaces","description":"Cembond 945 is a surface waterproofing for mineral surfaces. By adding Silex Polymer, we achieve outstanding strength and long-term durability.\n\nThe set sealant adheres to all mineral substrates—including damp ones—through a cross-linking reaction. It is perfectly waterproof while allowing for significant water vapor diffusion.\n\nCoatings with CEMBOND membranes seal against positive and negative water pressure, prevent concrete carbonation, increase sulfate resistance, and protect the building material from the penetration of damaging salts.\n\nThe Cembond 945 coating is tough and hard, yet easy to apply due to its soft-plastic consistency. This coating also allows for visually appealing, smooth surfaces.\n\nCharacteristic: Reactive, organic-mineral system\n\nComponents: 2 (powder and mixing liquid)\n\nAppearance: Grey-beige, pasty mass\n\nDensity: Approx. 1.8 g\/ml (fresh mortar)\n\nMixture A : B: 100 : 40 parts by weight\n\nDilution: With water if required. Maximum addition 20%\n\nConsumption: 1.8 kg per mm layer thickness \/ m²\n\nPot life: 90 minutes at 20°C\n\nMinimum layer thickness: 2.5 mm\n\nDiffusion resistance: 800 - 1000 (water vapor)\n\nPressurized water tightness: Up to a maximum of 7 bar\n\nThe CEMBOND M types are not reprofiling mortars. To avoid stress cracks, the recommended layer thickness must not be exceeded, or products may be \"leanened\" by mixing with coarse quartz sand if necessary. However, leaned products are no longer waterproof and must therefore be recoated with at least two layers of undiluted product.\n\nFreshly applied coatings with CEMBOND-M must not be subjected to pressurized water.\n\nWhen laying tiles and slabs on waterproofed surfaces, ensure the covering is fully bedded.\n\nCoatings made of CEMBOND-M are not diffusion-tight and are therefore not suitable as waterproofing under parquet, laminate, or other diffusion-tight floor coverings and coatings. This also applies to waterproofing under screeds if they are subsequently provided with a vapor-tight top covering.\n\nCoatings with CEMBOND-M are not wear-resistant layers and must therefore be protected from mechanical stress.\n\u003ch4\u003eApplication\u003c\/h4\u003e\nExterior waterproofing of building surfaces in contact with the ground. Against ground moisture, seepage and perched water, and also pressurized water up to 70 meters water column.\n\nInterior waterproofing against water pressure from the outside - up to 40 meters water column.\n\nInterior waterproofing of containers for water, wastewater, liquid manure, etc., up to 40 meters water column.\n\nWaterproofing under ceramic coverings in bathrooms, showers, on balconies, and terraces.\n\nCan be applied to standard concrete, fully jointed masonry* (including gas or aerated concrete), and cement-bound plasters (MG III plaster). All substrates must be clean, free of dust, contaminants that impair adhesion, cement laitance, and be sufficiently load-bearing. Sharp edges must be broken, formwork burrs removed, and honeycombs and depressions filled.\n\nBefore coating, the substrate must either be thoroughly pre-wetted to create a uniform, matte-damp surface, or the area must be primed with CEMBOND-956. For this purpose, Cembond 956 is diluted with water at a ratio of 1:2 - 1:3 and applied generously.\n\u003ch4\u003eProcessing\u003c\/h4\u003e\nCEMBOND-M products consist of a fine-particulate solid and the appropriate mixing liquid. For processing, the solid and liquid are thoroughly mixed using a stirrer until a smooth, homogeneous mortar is formed.\n\nThis mortar mass is immediately ready for use. Its consistency is soft-plastic, allowing the material to be applied easily and well with a notched trowel (square notch, 4mm) and subsequently smoothed. In this state, application with spray equipment for fine plaster—e.g., the Putzmeister Sprayboy®—is also possible. For thin spatula applications or to achieve a brushable consistency, the mixture can be further diluted with up to 20% water.\n\nThe coatings must be applied in at least two layers with a total minimum thickness of 2.5 mm. The total layer thickness should not exceed 5 mm. The thickness of the layers must be uniform to avoid issues caused by uneven drying. CEMBOND surface waterproofings are not leveling plasters.\n\nIf coarse unevenness, damaged areas, etc. need to be leveled, the mixed mass should be \"leanened\" by adding 20-40% quartz sand (grain size approx. 0.5 - 1.2 mm, depending on the grading curve and the desired effect). Such repair mortars still possess the excellent adhesion to the substrate typical of CEMBOND, but are no longer liquid-tight and must therefore always be recoated with a sufficient thickness of undiluted product.\n\nThe formation of cracks in the building structure must be prevented by constructive measures. Waterproofing of expansion joints must be carried out using suitable, permanently elastic systems. In the case of pressurized water, special technical solutions such as the installation of special joint profiles, sealing with flexible sealing tapes, backing injections, etc., are necessary as accompanying measures. These must be determined on a project-specific basis.\n\nWaterproofing of buildings generally requires the waterproofing to be arranged on the water side (positive waterproofing). The waterproofing should be brought up approximately 30 cm above the final ground surface. When waterproofing from the inside (negative waterproofing), particularly careful substrate preparation is necessary to ensure optimal adhesion of the coating to the building material.\n\nA visually appealing surface effect is achieved by working with a wet paint brush (ceiling brush, flat brush) or by smoothing with a trowel held at a flat angle.\n\nDuring processing and for at least two days thereafter, the sealant must be protected from intense heat, direct sunlight, rain, frost, and drafts. It is recommended to keep the fresh coating moist for at least 24 hours.\n\nThe products are non-flammable, but the liquid components are sensitive to frost. When stored in a cool, dry, and frost-free place, CEMBOND products have a shelf life of at least 12 months.\n\u003ch2\u003eSystem accessories for Cembond 945 M - Surface waterproofing for mineral surfaces\u003c\/h2\u003e\nCembond M 947 flex – flexible sealing slurry for surface waterproofing\n\nHydroBloc Si 709 – siloxane concentrate for horizontal barriers\n\nSeal Fix expansion mortar 930 for sealing injection holes\n\nSilex Suspension 931 – application-optimized injection mortar for void filling\n\n\u003cstrong\u003eContainer: 17.5 kg\u003c\/strong\u003e\n\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eAttention: Frost-sensitive material. Can only be shipped at \u0026gt;5°C.\u003c\/strong\u003e\u003c\/span\u003e\n\n","brand":"ARCAN","offers":[{"title":"17.5 kg","offer_id":62357905801546,"sku":"1093","price":102.27,"currency_code":"EUR","in_stock":true},{"title":"77 lbs","offer_id":62357905834314,"sku":"1094","price":200.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Dichtschl_C3_A4mme-_C2_BB-Cembond-945-M-3750-kg-e1444140015516.jpg?v=1782831260"},{"product_id":"cembond-m-947-flex-flexible-dichtschlaemme-zur-flaechenabdichtung","title":"Cembond M 947 flex – flexible sealing slurry for surface waterproofing","description":"\u003cp\u003e\u003cstrong\u003eCembond M 947 is a flexible surface waterproofing system.\u003c\/strong\u003e CEMBOND 947-flex surface waterproofing is a sealing system for mineral surfaces. The waterproofing against water is based on the unique Cembond polymer technology. The Cembond polymer gives Cembond sealing slurries their outstanding surface waterproofing properties. The Cembond polymer reacts chemically with the cement, creating an organo-mineral polymer structure that has excellent strength and durability. Thanks to this cross-linking reaction, the Cembond sealing slurry also adheres to damp mineral substrates.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eAlso suitable for damp substrates\u003c\/li\u003e\n\n\u003cli\u003ePolymer structure\u003c\/li\u003e\n\n\u003cli\u003eVapor-permeable\u003c\/li\u003e\n\n\u003cli\u003eIncreases sulfate resistance\u003c\/li\u003e\n\n\u003cli\u003eProtects building materials from salts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eWaterproofing membranes made of CEMBOND 947-flex are highly flexible, organo-mineral films with excellent low-temperature flexibility. Cembond 947-flex is crack-bridging, but large cracks and joints must be secured separately with HydroFlex sealing tapes. The product is recommended as waterproofing under trafficable areas, for the internal waterproofing of concrete containers, and generally for surfaces prone to cracking. In a special formulation, M-947 can also be used as a waterproofing system for road surfaces on concrete bridges \u003cem\u003e(“bridge deck membrane”)\u003c\/em\u003e directly beneath mastic asphalt.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCharacteristics\u003c\/td\u003e\n\n\u003ctd\u003e Reactive, organic-mineral 2-component system\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eComponents\u003c\/td\u003e\n\n\u003ctd\u003e 2 (solid\/powder component and mixing liquid)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDensity\u003c\/td\u003e\n\n\u003ctd\u003e Approx. 1.55 g\/ml \/ fresh mortar\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMixing ratio A : B\u003c\/td\u003e\n\n\u003ctd\u003e 100 : 40 parts by weight\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDilution\u003c\/td\u003e\n\n\u003ctd\u003e If necessary, with water. Maximum addition 10%\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\n\u003ctd\u003e 1.55 kg for 1 mm thickness per m2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\n\u003ctd\u003e 90 minutes at 20°C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCrack bridging\u003c\/td\u003e\n\n\u003ctd\u003e Up to 1000 µm (1 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMinimum layer thickness\u003c\/td\u003e\n\n\u003ctd\u003e 2.5 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDiffusion resistance\u003c\/td\u003e\n\n\u003ctd\u003e 900 - 1100 (water vapor)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePressurized water tightness\u003c\/td\u003e\n\n\u003ctd\u003e Up to a maximum of 7 bar\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSystem accessories for Cembond M 947 flex – flexible sealing slurry for surface waterproofing\u003c\/h2\u003e\n\u003cp\u003eHydroBloc Si 709 – Siloxane concentrate for horizontal barriers; Seal Fix expansion mortar 930 for sealing injection boreholes; Silex Suspension 931 – application-optimized injection mortar for cavity filling\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e17.50 kg\u003c\/li\u003e\n\n\u003cli\u003e35 kg \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003e\n\n\u003cspan style=\"color: #ff0000;\"\u003eThe material is sensitive to frost and must NOT be transported or stored at temperatures below 5°C.\u003c\/span\u003e \u003c\/h4\u003e","brand":"ARCAN","offers":[{"title":"17.50 kg","offer_id":62357905867082,"sku":"1095","price":135.28,"currency_code":"EUR","in_stock":true},{"title":"77 lbs","offer_id":62357905899850,"sku":"1096","price":280.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/files\/ARCAN-Bauchemie-Abdichtung-_C2_BB-Dichtschl_C3_A4mme-_C2_BB-Cembond-947-M-e1445425858937.jpg?v=1782831261"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/8626\/4394\/collections\/Kategorie-Dichtschlaemme.png?v=1785357829","url":"https:\/\/shop.arcan.biz\/en\/collections\/dichtschlamme.oembed","provider":"ARCAN GmbH Abdichtungen – Handwerkerstore","version":"1.0","type":"link"}